Supernetting: borrows bits from the network ID and masks them as the host ID for more efficient routing.
For your case, I think this can help. First you need to calculate how many nodes you are going to have. Plan for growth in this estimate.
Let's say you needed 1800 nodes. You would then borrow 3 bits from the network ID, giving you a possible 2048 addresses. This would equate to 2032 nodes, the other 16 address are for the 8 network ID's you would need and their broadcast addresses. This subnet mask would be 255.255.248.0.
If I was coming off the internet and pinging you, a conventional routing table may look like: (where 172.1.1.1 is your router)
172.1.1.0 255.255.255.0 172.1.1.1
172.1.2.0 255.255.255.0 172.1.1.1
172.1.3.0 255.255.255.0 172.1.1.1
172.1.4.0 255.255.255.0 172.1.1.1
172.1.5.0 255.255.255.0 172.1.1.1
172.1.6.0 255.255.255.0 172.1.1.1
172.1.7.0 255.255.255.0 172.1.1.1
172.1.8.0 255.255.255.0 172.1.1.1
After supernetting it would just be:
172.1.1.0 255.255.248.