Question Locked

SuSE SLES 10.2 new install - can't find raid

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am (trying to) install SuSE SLES 10.2 on a HP poweredge 2400, with raid5.

The controller is an Adaptec ALC 7890 v25701, PERC2/DC.

From a morning of googling, I am reading that they don't include the older raid controller in the kernel. I have not yet found how to add this in.

I have worked with boottime loadable drivers before, but never took this long to find answer.

Any ideas? Thanks!

jd

11 replies

by jaqui

if yes, choose the expert install, vga-low and you can get the driver selection to let you load the driver from floppy.

NOTE: I have seen Adaptec drivers lock a system up under Linux. They are known to be buggy, the roms from Adaptec that are needed for the cards.

by jdclyde

and not a driver? I have downloaded this and it is on a floppy. after looking at it, it looks like a lower version.

If I look with Windows for the OS, they have a driver, but not for SuSE.

Searching on the Novell site, but not finding it there either.

I had also typed in expert at the install screen and it just takes me in the same as if I had clicked on the installation option.

by jdclyde

did a google search for "American Megatrends (AMI) PERC2/DC suse" but I am coming up blank.

Any of you linux guys out there got a good driver site?

by jdclyde

now when I google the card looking for a driver, all I find is THIS discussion! :0

damnitallanyways!

by jdclyde

Even though the Raid card is not on their certified list, they hashed it out and got me an answer that worked. I am on disk 4 of 4 on my install right now. :D

The solution:

At the install screen, select Instillation and then type in:
[b]
insmod=megaraid insmod=aic7xxx
[/b]
That was my answer for it to install.

Thanks to Jaqui for looking into it for me.

by jaqui

one of the few who would catch the meaning of that one. :D

This discussion is closed to new replies.