Question Locked

Switch to Router connection - how to configure

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I have a question regarding a how can I enable LAN connection to my D-link DI-524 wireless router connected to a switch.

Here is my setup

Modem -> 2821 Cisco Router -> HP procurve Switch -> D-Link DI-524 wireless router.

I have a static IP given by my ISP, Internet connection and Lan connection is functioning, My problem is setting up the D-link router to be able to join my LAN and able to access wireless.

6 replies

by shady108

all you need to do is login to th edlink and set it up with a static ip thats in the range of your network. for example our router is setup as 10.10.0.1 and our wireless box is set on 10.10.0.5

reserve that IP address on your DHCP server so its not issued to anyone else and you should be able to connect. make sure your dlink isnt set to dhcp , you want your clients to get ips from your main dhcp server

by derflanoj

Thks, Shady I did what you told and it perfectly work now my wireless connection are hooked in my LAN but I have a problem, I can't browse the Internet but if I specify my dns I can browse the Internet. Here are my setup again.

Modem -> Router - > Switch - Dlink wireless router

1. I have a Windows 2003 server configured as domain, dns, active directory.
2. 10 desktops which are already joined in the domain and 3 laptops, all 10 desktops are running Windows Business Vista while all 3 laptops are running Vista Home.
3. I have disabled the dhcp in both the router and my domain server are able to give dhcp address in all the clients.
4. I have the defined the dns IP that was given to me by my ISP on the cisco 2821 router.

I can only able to browse the internet if I will define my dns ip address, I want my clients to automatically get the dns.

by derflanoj

Thks, Shady I did what you told and it perfectly work now my wireless connection are hooked in my LAN but I have a problem, I can't browse the Internet but if I specify my dns I can browse the Internet. Here are my setup again.

Modem -> Router - > Switch - Dlink wireless router

1. I have a Windows 2003 server configured as domain, dns, active directory.
2. 10 desktops which are already joined in the domain and 3 laptops, all 10 desktops are running Windows Business Vista while all 3 laptops are running Vista Home.
3. I have disabled the dhcp in both the router and my domain server are able to give dhcp address in all the clients.
4. I have the defined the dns IP that was given to me by my ISP on the cisco 2821 router.

I can only able to browse the internet if I will define my dns ip address, I want my clients to automatically get the dns.

by cg it

when you setup your WAN connection on the router with a static IP you also have to specify DNS servers. DHCP will grab this information and provide it to client computers.

by derflanoj

Hi CG IT thanks for the reply, are you referring to the dns in my server, Yes I did provide the dns on my router same with the dns with my windows 2003 server. Hope you can help me on this because I still have'nt fix this problem.

This discussion is closed to new replies.