Discussion Locked

Switches

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I have a question about how long can a switched network be spread. For example, I need to connect computers along a route which is as long as 700 meters.

Computers are distributed along the route, and the fiber is quite expensive because of number of station I will need to install.

So the question, how many swtiches can I connect without a router? For example, Assuming that we have Fast Ethernet switches here, can I connect?: hub- <100 -switch- <100m -switch- <100m -switch- <100m -switch- <100m -switch- <100m -switch- <100m -hub.

In any case I would like to review some web acrticles about it. And if you know it, I hope you'll post it here.

Waiting for your reply,
Andrey Nepomnyaschih
nas@assystems.lv

5 replies

by mpdcsup

You can do it that way, but I wouldn't do it that way. That's like plugging 10 extensions cords together -- not wise. When installing a network you should be performing some planning. In that planning you should take into account:

- your company's growth and space usage plans

- the flow of information between your systems

- future technology investments

Depending on the number of workstations being connected, with a 700 meter spread, you should probably use a two-tier system.

by tbradley

You have to remember 2 keys of an Ethernet infrastructure. There is a 100m distance limit over 100mps copper, and the 543 rule.

If money is the biggest issue, then you have to do some careful planning.

Get a scaled building plan of your site.Draw
100meter circles to cover all the office areas you must serve. Then select the 100meter circle which is closest to the center of the site.

Use this circle as your core, and use no more than 2 more switches to connect outlying circles.However, I would recommend investing in a fiber optic backbone. While the cabling is expensive, the supporting equipment is relatively cheap as long as you are happy with 10/100 mps. The central circle would connect all outlying circles via fiber, and those areas would serve the end users.

This discussion is closed to new replies.