Discussion Locked

System cannot choose correct Ethernet

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Setup: two computers, a hub and an ADSL modem. The sever running Windows 98 SE, the client Windows 98. The Sever has two identical Ethernet 10/100 MBS cards, one connecting directly to the modem, the other to the hub.
Problem: The server cannot differentiate between the two ethernet cards which bot work correctly but show both up in the systems as identical (no #1 or #2 added). When both cards are active and installed cannot log on to Internet (did not even think of trying to log on to client yet).
Question: How can I make this work, how can I make the server differentiate (I already changed the physical location of one card to another slot, no avail).

13 replies

by meganetcomputers

What is the reasoning behind having two NICs in a windows 98 box? If you simply what to have access to the internet for both PC just plug them into the hub and plug the DSL modem into the uplink port. You will have access between the computers and to the internet. If you need any further assistance please contact me at support@meganetcomputers.com

by bazz00

Only connect both PC's and the ADSL modem directly to the hub if your ISP allows you to have more than one IP address to allow more than one direct connection to the modem.

Otherwise for the setup that you currently have: 2 nics in the server anda hub then the best thing to do would be to set up ICS (Internet Connection Sharing) on the Server side. With this configuration you will have 1 of the nics on the server for you internal LAN and the other will be the xternal connection to the internet.

First I would uninstall one of the nics in the server and verify that you have internet connectivity via the active one. Then reinstall the second adaptor and connect both machines to the hub via a straight through network cable or connect the 2 machines directly (Nic to Nic) via a crossover cable. Do not assign ip addresses or configure the adaptors in anyway, other than the 2 internal nics should be set to obtain an IP address dynamically and then just make sure that they are installed and that client for Microsoft and file and print sharing are installed on the adpators used or the internal LAN and that they are not installed on the external adaptor connecting to the Internet, you just need TCP/IP for that adaptor.

Then run ICS on the server which will take you through a wizard and set up the internet sharing. What ICS will do is assign private Ip addresses onto the 2 internal NICs and use NAT (Network Address Translation) to hide and protect your internal network form the internet but allow the server to resolve the public IP address supplied from your ISP to the 2 private internal addresses.

If you have anymore trouble then go to www.google.com and just search for "home networking".

Hope that this will help you!

by amersiov

Addendum to #2 You can connect all to hub if computer #2 has computer #1's (server) ip defined as gateway...no issues with service provider
you can also use ICS and 2 nics, but still add gateway info

by avidetto

First I agree why are you using 2 nics? You have 2 9x systems. 1 DSL connection and a Hub.

You have a couple of options.

1. If your isp issues multiple address connect one nic per system to the hub, thent he hub to the dsl.

2. If it does not, connect 1 nic per to the hub, hub to dsl, and install internet sharing (this requires one system to be turned on to use the other.)

3. Look at your hub/router and see if it has NAT function. Personally the easist and most effective (as well as cheap) is just to get a router/hub that will do NAT/Firewall, etc for you. Homeportal by 2wire, US Rob., Lynksys, and several others offer these for between $50 and $250, you plug em in and follow the directions. This ill also add USB Support, Firewire, or other methds of connection and up your addressing to allow for your homenetwork to grow in the future (without extra costs).

by avidetto

First I agree why are you using 2 nics? You have 2 9x systems. 1 DSL connection and a Hub.

You have a couple of options.

1. If your isp issues multiple address connect one nic per system to the hub, thent he hub to the dsl.

2. If it does not, connect 1 nic per to the hub, hub to dsl, and install internet sharing (this requires one system to be turned on to use the other.)

3. Look at your hub/router and see if it has NAT function. Personally the easist and most effective (as well as cheap) is just to get a router/hub that will do NAT/Firewall, etc for you. Homeportal by 2wire, US Rob., Lynksys, and several others offer these for between $50 and $250, you plug em in and follow the directions. This ill also add USB Support, Firewire, or other methds of connection and up your addressing to allow for your homenetwork to grow in the future (without extra costs).

This discussion is closed to new replies.