Question Locked

System can't start

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have eMachine D620 notebook, all of a sudden it refuses to boot. When you press power switch, the power light show and d fan is working, but the system can not show anything on the screen.

14 replies

by darryl~

Can you hear then Windows startup sound?
Is the hard drive light staying on or does it come on at all?
We need a little more information.

by danlamimohd

the hard drive light staying without blinking. No sound can be heard.

by oh smeg

Unplug the Mains Adapter and see if it starts now. If it doesn't unplug the battery and plug in the mains adapter and try again.

I've seen some cases where a NB will not start with the Mains Adapter plugged in and others where the NB will not run if there is a Battery connected. Of course the last issue has always had a battery that has failed or is in the process of going off.

Not sure why some will not start on the Mains Adapter though. ;)

If that doesn't help post back with more details like what if any Lights appear when you press the On Switch, what sounds do you hear if any and what happens when you plug in an external monitor.

Col

by danlamimohd

I have tried ur suggestion, i.e. removing both the mains and the battery, but still the same problem. Infact, i have tried a differnt RAM, Hard driver, but none seam to work. I also try reseating the processor but all to no avail. kindly assist.

by oh smeg

And clearing the BIOS. If that doesn't do anything the M'Board has suffered damage and needs replacing.

Col

by danlamimohd

The system cannot even show post screen. nothing happen when you press the power button only the light shows.

by el_duce

Most likely your motherboard or cpu are toast

by darryl~

it might be just as cheap to buy a new netbook.

by prrethish

Remove the battery and fix it back
Power on the system
Press the caps lock button and check whether caps lock button on/off
If it u can turn it off/on that means system boots up
Connect to an external monitor and redirect the display

This discussion is closed to new replies.