Discussion Locked

SYSTEM HALT

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

--INSTALLED TWO PERIPHERALS 1)CD-WRITER & 2)
IOMEGA ZIP DRIVES.ORDER OF PHYSICAL INSTALL
HDD-PR. MASTER ZIP-PR. SLAVE. CD-WRITER 2ndARY MASTER CD-ROM 2ndARY SLAVE.INSTALLED
2 SOFTWARE ,CD CREATOR &IOMEGA SETUP SIMULTANEOUSLY.WENT TO MSCONFIG REMOVED SOME STARTUP ITEMS.WHEN REBOOTED GET MESSAGE REGARDING VFAT & SYSTEM HALTED.WHEN MOVED TO STARTUP-STEP BY STEP CONFIGURATION,TOLD ME
ABOUT MISSING DEVICE DRIVERS IN SYS.INI.ONE FILE REFFERED TO IS WINDOWS\SYSTEM\WMM32 ALSO SOMETHING LIKE ENABLE VXD.ANY HELP TO RESOLVE THIS WILL BE MOST HELPFUL.ALSO TRIED
STARTUP IN DIAGNOSTIC MODE,WITHOUT SUCCESS.
SCANREG/FIX OR SCANREG/RESTORE DID NOT ACCOMPLISH ANYTHING

16 replies

by nicholas paras

To make things easier, startup via bootup diskette and reinstall windows, no need to format, just reinstall over existing installation to rebuild necessary files. Should do the trick.

by azizhakim

MY ERROR WAS I TRIED TO REINSTALL AFTER PC BOOTED IN DIAGNOSTIC MODE & I OPENED MY D:&
WENT TO SETUP FROM THERE-SO IN ESSENCE IT DID NOT RECTIFY THE HALT & STARTED THE COPYING PROCESS AFTER BOOT,YOUR ANSWER INDICATES I SHOULD DO A COMPLETE BUT UNFORMATTED INSTALL,CORRECT?

by azizhakim

you r absolutely right & deserved points,i reinstalled with one minor problem.i will resubmit a related question

by volksjager

Boot from your floppy and re-instal NT. Select repair installed version. This should do the trick, all the missing files will be replaced.

by dmiles

Insert the ERD created at the time of install,Insert in A:drive,then boot system up,files will be copied to hard drive,if there is no boot disk.Go to Start-Programs-Accessories-System Tools,when the window opens,click on the Tools button,and choose file checker,insert the OS CDROM and follow the on screen instructions.

by azizhakim

WILL-TRY THIS ROUTE ,THE ONLY DILEMMA IS IT HAS WIN98 INSTALLED.START DISK INSTEAD OF NT
E.R.D.IT SHOULD WORK SHOULD IT NOT?

by ec364

Rename the Explorer.exe file from c:\windows directory to something else. Make sure that you have the Product ID handy. Re-install Windows. Do not format the drive. All settings and configuration will be retained plus detects the new devices. This is simply to rebuild the Windows system files that have been corrupted.

Good luck!

by azizhakim

thank you 4 kind help.finally i got to give you your earned points,but most important help-

This discussion is closed to new replies.