Discussion Locked

tcp/ip address on laptop

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a laptop that connects DHCP to a general network. I also use this laptop frequently to connect to a small office network that needs static ip definitions.
Is there a quick simple way that doesnt require changing the properties of the networkcards tcp/ip definitions to switch ?
I dont mind doing something complicated ( such as building a reg file) once but not every time.
I have tried defining hardware profiles and another netcard , this doesnt work.

8 replies

by m&m

This may or may not be a possibility for you, however I would try the following approach:
1) Reserve an IP (or exclude it) on DHCP for your laptop in the general (DHCP) network
2) multihome your laptop (NIC) with:
i. The reserved IP from the DHCP network
ii. A fixed IP from the static IP network

by kahana

this is a good idea but doesnt give the capabiliteies for a different default gateway , dns, wins
I decided to use two network cards

by paul.moore

I had used a program called NetSwitcher previously for my laptop for moving between home and work, it lets u set up different profiles for wherever you work and asks you which profile you want to load the next time you boot your computer. You acn download a 30day evaluation for it here: www.netswitcher.com and it only cost something like $8 to register, which is for nothing really considering the amount of hassal it saves.

Hope this helps

Paul

by paul.moore

I had used a program called NetSwitcher previously for my laptop for moving between home and work, it lets u set up different profiles for wherever you work and asks you which profile you want to load the next time you boot your computer. You acn download a 30day evaluation for it here: www.netswitcher.com and it only cost something like $8 to register, which is for nothing really considering the amount of hassal it saves.

Hope this helps

Paul

by paul.moore

I had used a program called NetSwitcher previously for my laptop for moving between home and work, it lets u set up different profiles for wherever you work and asks you which profile you want to load the next time you boot your computer. You acn download a 30day evaluation for it here: www.netswitcher.com and it only cost something like $8 to register, which is for nothing really considering the amount of hassal it saves.

Hope this helps

Paul

by ebob

I read that you tried hardware profiles and another netcard, and did not have success with this. Hmmmmmm. My suggestion would be to use hardware profiles and the same network card. Assuming some sort of Windoze, just copy your working "In the Office" H/W profile and rename it "At Home". Then plug into your SOHO network and boot the computer up, selecting "At Home". You will not be able to log into the network, of course, but that's OK. Reconfigure your network settings to the static settings, and reboot. Again select "At Home" and you should be OK. Pay special attention to the domain/workgroup into which you're logging when switching between profiles, as this is bound to be a source of annoyance.

I have done this many times, to the point once of having one laptop with 4 H/W profiles. It worked fine, as long as I paid attention to picking the right profiler, and to logging into the correct domain/workgroup/local system (Win NT 4, this was).

This discussion is closed to new replies.