10 replies
by aaron v
by mail
by steve cody
Check your settings on the server and make sure that the two NICs are on the same subnet. If they are not, then you cannot use the Win98 machine for the gateway IP for the systems that are not on it's leg.
I believe that if all of your systems areon the same subnet, that the IP forwarding will allow the traffic across to the other leg. But, if they are on different subnets, they won't be able to use the Internet through the 98 system.
- Steve
by mail
I would make your routing tables dynamic by installing RIP for IP on your server. Also, check to make sure that the subnet masks for the legs are correct. Follow this order from a PC in the non-functioning leg:
1) Ping 127.0.0.1 -> if you don't get a response, then TCP/IP is not configured properly on that machine.
2) Ping IP address of a computer on the local subnet -> if you don't get a response, check the cabling on the subnet and the switch.
3) Ping IP address of the gateway for the subnet -> in you don't get a response, then either the gateway IP address is bad, there is a duplicate IP address, the mask is wrong, or the gateway NIC is not working.
4) Ping IP address of a computer on the other subnet -> in you don't get a response then the gateway PC is not forwarding packets to the gateway NIC on the other subnet.
by mail
by calves
I am somewhat confused by the question. If you have 2 subnets (legs) and you could be using real ip address, otherwise you would mention the router/firewall/proxy, or your are using a different protocol for the internal network (IPX/SPX or NetBEUI). If you're using Ip you can use RRAS from Microsoft. If you're using IPX, I don't know what needs to be configured to allow the protocol to cross subnets and if you're using NetBEUI you're out of luck, for NetBEUI is not routable.
RRAS is a programthat replaces your RAS and alows your NT machine to work as a router.
I have some good links out of my Web page at www.softsolutionsconsult.com - network.
Also, if you would like a proxy, check out
http://www.jana-server.ocm.de/Englisch/FrameSet.htm for a free proxy software that also do the routing.
Good luck!
by mail
by mail
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending