Discussion Locked

TCP/IP is still a problem!

0 helpful
23 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I cannot seem to browse the internet when connecting to my ISP (using DUN!!!). I can "ping" the ISP's DNS servers AND my DHCP-assigned address, but no Web pages! I have un-installed and re-installed TCP/IP, replaced wsock32.dll and winsock.dll and remove and re-installed ALL networking. Still no luck! Can anyone help?

P.S. My PC is NOT connected to a LAN!

Thanks!

23 replies

by dmiles

Reinstall your web browser by uninstalling through the add/remove programs and then add the browser from fresh install.goodluck

by avachon

Hi, some things to check. As you imply, not a TCP/IP problem; I agree. Double-check your modem (run at command from telnet, then dial your ISP through telnet to see if you get a connection). If works, great. Then, make sure you have latest 95 or 98 patches for dun (I know there was one for 98). You would need to do this stuff anyway; if still not working then it may indeed be your browser (also make sure clear text authentication is checked in dun - other encryptions could keep pages from coming us). I hope these suggestions help.

by dustyd

One other thing to check, you say you are not networked, then check to be sure that TCIP is the only protocol bound to your dial-up adapter. You should not see Netbeui at all in network components, nor any internet connection sharing protocols.
Hope this helps.

by x-cyber

Here is a small datail that you should check. Open your Browser Options, and check that you're not using a Firewall.

That's it, if it is correct, check other answers.

by rmmcp

First of all, since you can ping your ISP's server and your on DHCP IP address, then your connection is working properly. I would advise to not do anymore .dll or networking reinstalls. If your connection is working, then leave it alone. Only check and make sure you have the latest updates from the windows update site. That side of things is getting it's job done.
The first thing to check is that IE properties/Connections is set to use your connection as the Default. Then check that Proxy is disabled. Do not use AutoDetect Settings either.
Then under Networking Properties/TCP/IP properties, check that WINS is disable. If its enable, this sometimes throws a browser address call the wrong way. Most ISP servers don't use WINS anyway. I knowif have this enable, it will slow my web page loading to a crawl.
Second, once this is done, try pinging an IP address of a know web page. If this works and IE will still not load a web page, download and install IE 5.01. This way you reinstall IE and get the latest br

by steve cody

You did say that you can ping your ISP's DNS servers, and your IP address.
HOWEVER, have you tried pinging a host name, such as: ping www.techrepublic.com.
If you try that, at a DOS prompt, after connecting to your ISP, and get an error like Bad IP address, then your problem is name resolution. Your DNS server's addresses may be incorrect, or the servers themselves may be having problems.
This situation happened to someone I know, on Road Runner Cable internet service. After manually specifying DNS servers that I knew worked, the user could then browse the Internet.

by jesselou

check you dialup adapter if it is bind with your tcp/ip to do this go to control panel click network choose dialup adapter,click properties located under dialog box,click bindings ensure tcpip is check in the checkbox.then reconfigure your internet browser by going to it's option there type in
your isp proxy server description with correct spelling.if done close the browser and start your connection manager.

by moflic

Use default gateway on remote network is checked? That's in DUN's config in TCP/IP properties. Logon to network is checked?
Enable software compression might need to be unchecked if your ISP has some ?nix because MS uses an incompatible compressionscheme. Your ISP might have a proxy to give you access to the web. Place the proxy settings of your ISP in your IE settings.

by bert.chew

Tools, Internet Options, Content, Autocomplete button. Select (check)"Usernames and Passwords on Forms"

Bert

by stevenreedsr

If you can ping your tcp\ip is ok, dont change it, uninstall your current browser then install newer version of whatever browser you are using, make sure your security settings are the default settings and if this still dont work contact your ISP tech support and pose the question to them (sounds like problem is on their side anyway)
you can also check to see if client for microsoft networking is installed if not install it. Also all those installs and unistals of the networking components could have corrupted some of the registry settings and this will require an os reinstall (easiest way to fix registry) Good luck

by cagandhi

just follow the steps bellow :-

1.) check your Network Neighborhood property & u need only two things there, Dial up addeptor & tcp/ip for dua.

2.) go to your dial up connection's property & give the ip add. of your isp's DNS server in the primary ip of dns.

3.) if previousely connected to LAN & also using proxy server, then uninstalled the Proxy Client if installed.

4.) select use my default connection in the connection property of IE.

that's all.
now u can able to browse the net successfully.

This discussion is closed to new replies.