Discussion Locked

TCP/IP Routing cmd line or script

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows 2000 Proffesional SP1 on an AMD K6-350 w/ 128MB RAM/20 GIG storage
Initial conditions:
Interface index 0: loopback interface at 127.0.0.1
Interface index 1: primary ethernet adapter at 192.168.0.1, mask 255.255.255.0, gateway 192.168.0.1,DHCP sever and NAT associated with this adapter.
Interface index 4: PPP RAS server connection at 192.168.0.200 server side and 192.168.0.201 at client side, sever gateway 192.168.0.200
Problem: Win 9x Clients have no netbios resolution for the remote network, although lan ip can be pinged at IF 1. No additional routings made at time of connection. Win 2K clients can find remote hosts by name although they do not show in the network neighborhood (Computers Near Me).
MY feeble "Educated Idiot" attempts at modifying the routing table have served no purpose but to foul both the lan and the ICS services. Note: RAS connection is set to allow private network connections. How do I get a fully functional bridge between the PPP adapter and the lan adapter such that the remote network appears in the network landscape?

5 replies

by stillatit

The routing table is not your problem. If you can use ping across the network PPP link, the routing is correct.

The problem is that Microsoft networking and browsing uses the Netbios/Netbeui protocol broadcasts, which are not being passed by yourW2K box, which is acting as the router.

There are a couple of possible solutions, but the problem with them is that they will typically cause the W2K box to dial frequently, or may hold the connection up most or all of the time.

Solution 1: Put a WINS server on the network, and configure all stations to use it (including the W2K and the boxes behind it). This will replace the broadcasts with directed IP connections to the WINS server.

Solution 2: Enable Netbui over tcp/ip on all machines. On each machine put an entry into the LMHOSTS file for a domain controller on the network. This entry should include both the #PRE and the #DOM: tags. This allows the user stations to know a domain controller for the domain, and they can query the DC for the browse list.

Good luck.

by ajscott

Note the rating is merely to keep the q. from closing out.....
Your answer brings up a new question.....will WIN 2K proff. fuction as a wins server? If so how is this done?

This discussion is closed to new replies.