Discussion Locked

Tcp Slide Window configuration

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there a way to configure the Tcp Slide Window size for sending and receiving?

5 replies

by phinaddict

You will need to modify the registry to modify your tcpip window size. The key is located at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
TcpWindowSize
Key: Tcpip\Parameters
Value Type: REG_DWORD - Number of bytes
Valid Range: 0 - 0xFFFF
Default: The smaller of 0xFFFF

OR (The larger of four times the maximum TCP data size on the network

OR
8192 rounded up to an even multiple of the network TCP data size.)

The default is 8760 for Ethernet.

Description: This parameter determines the maximum TCP receive window size
offered by the system. The receive window specifies the number of bytes a sender
may transmit without receiving an acknowledgment. In general, larger receive
windows will improve performance over high delay, high bandwidth networks. For
greatest efficiency, the receive window should be an even multiple of the TCP
Maximum Segment Size (MSS).

Reducing the TCP Window size effectively causes an acknowledgment to be sent to
the sender for data received s

This discussion is closed to new replies.