Question Locked

TFT Monitor Fault - worth fixing?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All,

My monitor apparently died on me the other night. Its a DGM L-1721 15inch TFT.

I have a totally black screen. When plugged in, the power light pulses every second (this is not the same as the slow pulse that happens when its in standby mode), but pressing the actual power button has no effect whatsoever.

I've changed the power cables, the adapter, and it makes no difference if I've plugged the monitor into a different PC or to no PC at all. The DC power socket IS a little loose, but no amount of fiddling, gentle circling action or pushing hard has any effect.

Sounds to me like something major has gone wrong on board. My question is, considering the monitor is out of warranty, is it even worth trying to get it fixed or should I just buy a new one?

4 replies

by mjd420nova

They cost around $150 US and are getting cheaper as we speak. Replacement is the easiest unless you're the type to look inside first. If you have the skills, you've been there before, go for it. Sounds like a power supply failure in the monitor.

by as

Yep my conclusion also. I could do without the expense but don't have the skills myself so would probably cost more to fix then replace. I just wondered if it sounded like a "Oh just do this" type problem.

Thanks anyway.

by ozi eagle

Hi,
I had this same thing happen a while ago.
After swearing a while I came to the conclusion that the light tube had gone, as I could faintly see the screen if I looked closely in bright light.
Being stingy I thought that I'd try another plug pack of the same voltage and polarity.
Lo and behold it worked.
To double check I plugged in the original plug pack again, expecting a black screen, and LO AND BEHOLD it worked too and has since then.

Don't ask me why!

Try it and good luck.

Herb

This discussion is closed to new replies.