Discussion Locked

The new face of GM, reality or just another mask?

0 helpful
246 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

246 replies

by maxwell edison

I'm not sure if that's a good reply or one intended to insult. Oh well, what else is new?

You tell me. Which is it?

by Member 25348569

I hired one last US trip because I thought it would be good - familiar - to drive as I own a Focus - 1.8 Zetec.

Despite having a bigger engine, it was surprisingly gutless. It also had a pretty poor "look and feel" but most disturbing of all was the hugely inferior handling. Just piss-poor chassis design, I suppose. The only reason that the car didn't drive me mad was that in Florida there aren't many corners to take at speed.

Just because Ford is a US company doesn't mean that the cars that it sells in Europe are.

:)

by sleepin'dawg

Surely you know by now that he's an expert on everything. Let's see now; due to his direct personal involvement, he's become an expert on R & R, Artist management,IT, Programming, Computer languges, Whisky, Horses and horse racing, Law, Management practices, Cigars, Motorcycles, The USA, Canada, The UK, foreign exchange, foreign relations, military affairs, politics, business in various foreign climes, medicine, video recording, cinematography, studio music recording,and that's only to name a few of his fields of expertise. He does exhibit a certain degree of modesty in admitting to somewhat inferior keyboarding skills, which makes for an air of refreshing modesty bur it must be difficult to exhibit such humbleness when you are as superior as the great OZ. The only question remaining is; with all this going for him , why isn't he rich. Maybe he's a philanthropist as well.

Let's wait for it. ;)

[b][i]Dawg[/i][/b] ]:)

by jdclyde

It isn't inferior keyboarding skills. It is as he has repeatedly told us, that he is in a hurry and just doesn't CARE enough to make sure it is right.

Oh, if only we were worthy his full attention....... :D

by oz_media

I can't type, my keyboard is actually missing the B right now, and I don't care enough to edit most of my comments, unless sharing a fair discussion with a reasonable person.

by sleepin'dawg

Along with the profundity of personal experiecnce and knowledge that OZ has, it seems 'ol OZ has also become an expert on the the economy and the markets. All this while we weren't looking. He must have foreseen the downturn and consequently made so much money, that he now, as JD says,doesn't give us his full attention. By his standards we don't deserve his presence. He misses the point that noby deserves having to put up with his know-it-all, mouthy attitude.

Amongst all his other areas of knowledge and expertise, it seems he has also taken the time to turn himself into an expert on physics and the Laws of Thermodynamics

As JD says,he doesn't give us his full attention, probably because he thinks of us as beneath him. This is much in keeping to his lack of any attention to detail, which accounts for the abysmal keyboarding skills.

Consequently we have lived to see ol' OZ take up opposing viewpoints within the same email, nevermind, within the same thread. Ol' OZ is a true wit; a nitwit!!!

Waiting for it. :^0

[b][i]Dawg[/b][/i] ]:)

by oz_media

Here we go again, yet another post from Dawg completely filled with lies and false assertions.

You offer so much BS I am not sure if you even know the difference between your lies and the truth anymore.
Last time you went on a rant, full of lies and BS, threatening me about coming here and visiting my home in Port Hardy, I called you to task and offered to meet you in the mainland while I was there on work.
I thought it would make things easier for you as i know the territory well.
You then told me that your 'bird' would be landing at Vancouver International for gas and you wouldn't be there long enough to come and meet me. I then offered to meet you at the airport as I have a friend who lives there and it would be no effort on my part. At that time you went on with some more excuses and more lies. You even said you had been by my house, and when I described a completely different house that doesn't exist, you agreed that was the one you visited and that I wasn't home, obviously caught in your lies.

So now we see yet more lies and false assertions, without an ounce of proof to support it, just like everything else you claim. Chances are you are a shut-in, you are a loser, a bottom feeder and a sad pathetic man just trying to be somebody you wish you had become, via the internet.

So once again we get to revisit another day of Sleeping Losers compulsive lies.

You suggest I am an expert on many things (flattery will get you nowhere), NONE of which I have EVER claimed to be an expert on. You seem to feel that offering opinion based on personal experience is the same as professing to be an expert. Is there ANYONE here who does not reply to posts or discuss topics based on personal exposure or experience? No, including yourself besides your lies.

False assertions/outright lies from you where you claim I profess to be an expert:

[b]R&R/Artists management[/b]: I have NEVER claimed to be an expert on either subject. However my 20+ years of personal experience do afford me a strong working knowledge of the industry. As I have many years of market development, artist development and industry exposure on various levels, I offer opinions from my own first-hand experience, but never claim to be an expert as you so decided to lie. I will defend a point in most cases as I usually have specific experience that others here don't

[b]IT/Programming/Computer languages:[/b] Not ONCE have I EVER said I was an expert in either field, NOT ONE SINGLE MENTION OF IT. Technically I am a Master Certified Novell Engineer, but I know CNE's that have more hands on knowledge and experience than I do. I know how to write basic python scripts/modules for use in email filtering and SPAM reduction. Again you lie. (Lie @2 actually)

[b]Whiskey[/b] again NOT ONCE have I claimed to be a whisky expert. I drink Scotch and have developed a pallet that can differentiate between brands and some finishes. I think I have a good understanding of Whiskey, what's good and what's crap, but never said I was an expert. (That would be Lie #3 for you now, I'm being nice by grouping your lies too)

[b]Horses and Horse racing[/b] Again you lie, I have NEVER EVER said I was an expert on horse racing, in fact there are NO such things as horse racing experts. I am a good handicapper and know how to read forms and predict potential winners based on past performances. I have never, as you claim, said I was an expert. Spending a lot of time at the track and studying race horses, I do have a better understanding of the races than most though.

[b]Law[/b] While I did consider following through and pursuing a legal career, after studying psyche and criminology, I chose not to. However, I do have two lawyers in the family, one who I have spent extensive time with learning law and sitting in on cases he has handled. He works in corporate law, so I use speak from real experiences and the BC law library when discussing corporate legal issues here. Again though, I have NEVER EVER professed to be an expert on law, just a person with a lot of personal exposure and a strong understanding of Canadian law.

[b]Management practices[/b] I have been in management since I was 18 or 19. I have managed groups from 4 to 200 staff, have a business management degree and am currently a business development manager. Though I have NEVER EVER claimed to be an expert, I do have a great knowledge of management practices and a lot of experience working in the field. (Losing count of all your incessant lies AGAIN!!)

[b]Cigars[/b] As with Scotch I smoke cigars and have done for some time. I have not EVER said I was an expert on cigars and I think the topic has only ever been raised once or twice in which case I have not offered any specific knowledge of cigars other than first hand experiences of my own. (Again, and not surprisingly, you LIE again.)

[b]Motorcycles[/b] Once again, you are a liar. I have owned motorcycles in the past, now own two dirt bikes. My uncle used to race bikes on the Isle of Man and I have fixed my own more than a few times, so I do have SOME first hand knowledge and some passed on. At NO time however, have I EVER said I was an expert on the subject though. I can discuss experiences and offer personal opinions on bikes but that's about it. (what's that, LIE #100 from you now)

[b]The USA, Canada, The UK,[/b] USA, I have travelled America more than many Americans. I have operated offices and stayed in the USA for extended periods of time, I have seen MOST states. I have conducted business in and with Americans and American companies for years, I market to teh American public. When I speak of America I speak from personal experience and offer personal opinion based on that experience. I have NEVER EVER said I was an expert though, just another LIE from you again. Canada, well I frickin well live here, I think I've got a pretty damn good understanding of Canada but am not a political expert nor have I ever claimed to be one. The UK, first of all I was born there, I AM a UK citizen, I have most of my family there, I have bank accounts and run a business based just outside of London, I have artist contracts there and still spend time there when I can. While I again NEVER claimed I am an expert on the UK, just as any other citizen of any other country I do have a valid and qualified opinion on most matters. Once again, the Dawg is a blatant LIAR.

[b]Foreign exchange?[/b] That's just a lie to begin with, no idea what you were on about there. Have I exchanged money before? yes, and I have a good friend who is a foreign exchange broker, I guess that means you see me as an expert.

[b]Foreign relations and military affairs[/b] Even governments with a ministry of foreign affairs aren't experts on foreign affairs and I have DEFINITELY NEVER said I was an expert on foreign affairs. It seems that if I have an opinion, you confuse that with me saying I am an expert. Well thanks again for the flattery, but it is unwarranted in this case. (You just wanted to lie some more, didn't you? What else is there to do when you name yourself DAWG). Military? My opinion is as valid as any and based on similar criteria.

[b]Business in various foreign climes[/b] I have conducted business worldwide. part of that role is having a good working knowledge of business practices, demographics and marketing across different markets. Once again, I have NEVER EVER said I was an expert on the subject but merely offer my own knowledge based on personal experience.

You've lied god knows HOW many times now!

[b]Medicine[/b] I have offered my opinion a few times, especially with respect to private vs subsidized medical systems, but that is as valid as any. It doesn' t make me an expert nor have I ever claimed otherwise. You just don't know how to say anything without lies, do you?

[b]Video recording, cinematography, studio music recording[/b] I have HAD to learn video production for both work and for music videos, and have attended BCIT classes on video editing. I have NEVER EVER said I was a video editing expert. Again that's another LIE from you. [b]Cinematography?[/b] WTF? [b]Studio Music recording[/b], I was a concert sound engineer for 4 years, after that time I engineered and produced quite a few tracks for bands and have picked up the ability by hands-on work.I have a home studio with an analogue board used by AC/DC at Little Mountain Sound in Vancouver and run Cakewalk through it (pretty cool indeed!). I actually explained quite recently that I am constantly LEARNING that field, though I have sat with some pretty well known/famed engineers and producers as they helped me learn the ropes in their studios. Again THREE LIES IN ONE DAWG!!

Man, you just can't enter a single HONEST keystroke, can you?

So it is clear that if I have an OPINION on a subject and stand by my opinion, you feel that is the same as me CLAIMING to be an expert on the subject. This of course means that TR is full of experts on any field imaginable, as they all offer opinions, some just opinions based on media portrayals, others from life experience others from actually having a learned knowledge of the subject.

I know that with you being incapable of anything but being a compulsive liar, you must get depressed at the thought of not being an expert at anything but sharing lies. Your limbs have failed you, which is no laughing matter but a reality you face all the same. You are most likely just a shut-in, no life, no hope, nothing really worth waking up for, except to jump on TR pretend to be someone you aren't and spend all day spewing out more and more lies with no substance and no proof to support them

That is a pretty f'kin sad way to waste your few remaining years, but a great way to remind everyone of what the world will be rid of when those years and yourself finally expire.

by oz_media

However I have explained dozens of time that I am a jack of all trades but master of nothing, perhaps you missed all that amongst dreaming up your constant lies.

I am not an expert on R&R an dartist management, have never said so, though I do find I have more experience in the industry than anyone else that has come forward here so far.
I do appreciate your flattery but is just your view of my expertise I suppose.

I have NEVER EVER said I am a master at programming or computer languages. I am Master Certified Network Engineer (it's Novell's title, not a self imposed one, I have the paper/card too). I don't know ANY computer languages outside of Python, which I have only used for specific scripting based on its functionality with fewer lines and ability to make errors.
Whiskey? I drink a lot of fine Scotch and appreciate Scotch, but it is a personal preference, I have never claimed ot be a Scotch expert, EVER. Cigars? I smoke cigars but I have never said I was an afficionado on the subject.

How many more blatant lies will you come up with here?

Motorcycles? What have I ever said about beign a motorcycle expert? I own bikes, I ride, I can fis them but I have NEVER said I was an expert on motorbikes, again just more lies from you, as always expected.

the USA, I am NOT an expert on teh USA, have never said I was. I have great exposure to teh USA, have travelled MOSt of the US states, have oopearted US offices and stayed for extended time in the USA. I have met thousands of Americans and I am swamped with US networks from all over teh country every day.

Compared to people from teh UK, Middle East and Autralia, I have a greater knowledge of teh US and Americans than most foreigners do. I have also seen mroe of teh US than many Americana have. This does not make me an expert on teh subject nor have I ever claimed i was. Just that I make QUALIFIED opinions basedon first hand exposure and knowledge.
My knowledge of America is far more accurate than the lies you share here that are proposed as your own knowledge and expertise on me.

The UK, well I'm not an expert, more than any other citizen of the UK is, but I am from the UK, lived there, run a business there etc. and understand teh British mentality a lot better than most foreigners do. Again, your LIES about my "claims" that have never been made are unfounded.
Foreign exchange, that's ripe, post links please where I claim to be a foreign exchange expert, LIAR.
Foreign relations, NOBODY is an expert on foreign relations, including our nation's leaders and staff. I have also NEVER claimed to be an expert on foreign relations, again your just rife with LIES.
Military affairs, I get news you get news they get news etc. Please post that link to where I claim to be an expert on military affaors? liar.
Business in foreign climes? Again you lie for the sake or typing words. never claimed to be a foreign business expert, I have worked with businesses worldwid and marketed merhandise and promoted worldwide though. not an expert just speaking from personal experinces. Medicine? What teh F are you on about there? You are so clueless, what a liar! Video recording, I do a lot of video work, more then than now but am mroe focused on audoi engineering now. Cinematography? Where the hell do you come up with this garbage? Liar. stuiod recording, I have been to school for audio engineering and have worked iwth some pretty famous engineers and producers who taught me the ropes and some common mainstream hit tricks. it is a skill I am still developing but again yo LIE when you assert I claim to be an expert on the subject.

Compared to yourself though, who simply does nothing but lie about whatever he wants to make a point about, I am an expert in just about everything, but I pale in comparison to yrou ability to fabricate stories about people and make false claims and lie about what they say.

Why aren't I rich? I have investments, but I am not rich, I am also not teh person you seem ot think I am. According to your lies, I would be aout 7 hundred years old and a billionaire. but as reality has it, I am 40 and just been around teh block many times. It's not such a stretch when you aren't complacent or set on a single track through life.

My attitude is I'll do and try anything, if there's something I haven't tried yet, let me know so I can do it now.

sorry to hear that it is so unfathomable for you to see hwo someone can be mroe than a one trick pony.

I suppose its hard for you to comprehend, when you make a life of lies; its hard to for you to see how anyone could have done more with their life other than become a miseable, old, spastic, sod that is of no value to anyone, including himself.

I won't wait for your proof, you've never been able to support your lies before, why would you begin now?

by sleepin'dawg

Russian roulette with all the chambers loaded.

Just quoting you.

[i]My attitude is I'll do and try anything, if there's something I haven't tried yet, let me know so I can do it now.[/i]

We'll be waiting, but I know you're goig to let us all down. I'll try not to be too disappointed if you don't keep your word and follow through, although it will be considered a pity by many.

[i][b]Dawg[/i][/b] ]:)

by sleepin'dawg

But bad management going along with their demands sure has hell hasn't helped either. Throw in bad management decisions as regards product development and design, plus abysmally poor QC and it's no wonder it went belly up.

What unions better wake up and realize, is if they want the money they're demanding, they better insure they provide skilled labour of a sufficiently high enough quality to compete with foreign competition in the marketplace. They haven't been doing that since the fifties and have thus been passed by the Germans,Japanese and it looks now to be the Koreans. China will also probably pass the the US laborer as well. All sad, very sad.

[i][b]Dawg[/i][/b] ]:)

by jamesrl

Were cars that Top Gear has reviewed that were made in America and imported into UK.

Such as:
Ford F150
Ford Mustang
Chrysler Crossfire
Cadillac CTS V

AFAIK none of these are produced in Europe, and while creating a left hand drive version must cost some money, the premiums over and above seem outrageous.

As you yourself have pointed out many many many times, (and I've never disagreed with) the UK Focus for example is an entirely different beast, better suspension, differnet engines and gearing etc.

James

by jamesrl

Though I don't agree with everything Oz has to say on GM, the truth is that both Ford and GM have the same union. They also have pattern bargaining - the UAW and CAW(in Canada) pick one of the big three and negiotiate a new agreement(under threat of strike). Then the other car makers adopt that deal. So in the end the labour costs between the big three are pretty much the same.

Ford has managed their money better than GM. Ford has managed their product line better than GM.

So some responsibility has to rest with GM management, as well as the unions.

James

by jdclyde

Wasn't that long ago and Ford was hurting pretty badly, without their woes being caused by an economic downturn that is hitting EVERY automaker world wide.

What kept them afloat was trucks, much to the horror of the global community and econuts alike.

The big problem GM did was not have anything to fall back on to ride out a down economy, because of wasteful spending from top to bottom.

A majorly bad idea was when they closed up an engineering department and off-shored it a few years back. Doesn't seem like that foreign technology has been helping them, huh?

by jamesrl

You are correct that the profits from trucks did keep both Ford and GM afloat during hard times. But if you look at those figures I posted where I was trying to show that GM the corporation made more trucks than the Ford corporation, you will also notice a drastic decline in the number of trucks made and sold, from about 5 million in 2005 to just over a million in 2008.

So if the answer was trucks, Ford and GM would be in the same position.

Perhaps Ford saw the crisis coming earlier and they did manage to sell off some of their foreign brands when there were still buyers will to pay a reasonable value for them.

As for "foreign" engineering, I'm not sure its as simple as you'd like to portray it. GM got some of that simply by acquiring other companies. The new Saturns/Malibu got Opel engineering, but that capacity has existed for decades, they hadn't been taking advantage of it. Likewise the rear wheel drive car dynamic in the G8 came from Holden, who have been making cars for many decades. There has always been some engineering spread around, some in Canada, some elsewhere. But also note that the Japanese didn't significantly penetrate the truck market until they opened up engineering groups in the US.

No argument that wasteful spending hurt GM, and all the overhead from having too many brands.

One could probably argue that the engineering departments at Opel and Holden were leaner and meaner than the ones in Detroit and that may be why they had some success.

James

by sleepin'dawg

http://tinyurl.com/l9yudw

Sure Ford and GM have the same unions, but that doesn't mean they share a similar esprit de corps and/or work ethic. Neither can compete with their foreign competition in that area.

QA is set by management QC is provided by labour. GM's QC is toal garbage next to Toyota, Nissan, et al and now even Hyundai provides superior quality. For some obscure reason Ford's is slightly better. Canadian and American labour has priced itself out of the market and doesn't deliver on what it is being paid for.

[i][b]Dawg[/i][/b] ]:)

by maxwell edison

..... management has given-in to union demands over the past thirty years.

http://www.heritage.org/Research/Economy/wm2135.cfm

Unions, and the way management has let them ride roughshod over them, has destroyed the American auto industry.

Ford Motor Company continues to hemorrhage money, losing upwards of 17 billion per year (-7.00 per share), and it's seeing sales drop close to 30 percent. If Ford closed all plants and stopped making cars, they'd make more money. They LOSE money on every car they sell. That trend can't last for very long before they crumble.

All things considered, it costs Japanese automakers much less to produce an automobile than it costs their American counterparts - and ALL of the costs can be connected to Union demands (and management cave-ins).

And now the tax payers will be footing the bill for those Union demands.

by jck

I will look at it from home.

The mention of making a tent in my pants leads me to believe I need to refrain from viewing it, in case the department secretary calls me out for some advice. :^0

by jdclyde

this is NOT capitalism. The Obama does not WANT capitalism, which is EXACTLY why he is doing what he has been doing.

What else would you expect from someone that has never worked for a company that EARNS their place in the world?

Next thing you know, he will talk about empathy being more important than following our Constitution. Oh wait, he already has.....

by jamesrl

And I am well aware of the complaints about the Mitsubishi 3.0 engines in Chrysler minivans.

The Ontario plant just down the road from me was the only place in the world where the second generation LH cars (Intrepid/Concorde/300M) were made and its where the 300 and other derivatives are made today. So no one "rebranded" anything. They took engines in and installed them. None of them had an Mitsubishi info on them. They all came from Kenosha, WI.

As for my industry, I never said there were any guarentees in life, nor in any job. I worked for Nortel, once the biggest company in Canada, now in bamruptcy, so I know how it goes. But that doesn't mean I shouldn't feel sorry for those who have put their life into a career in an industry. And it isn't just people here, or in domestic manufacturers, many of my contacts at Japansese manufacturers are being laid off as well. There is a lot of valuable industry knowledge that will be lost, and won't be around in a few years when the industry starts to turn around. But I don't expect any sympathy or empathy.

James

by jck

compact, sub-compact, and other more fuel efficient car sales are not down nearly as much as large passenger vehicle sales, i.e.- SUVs.

For example, motorintelligence.com shows the 3 worst suffering car categories in sales for 2008 were:

Mid-sized SUVs: down 53.7%
Luxury SUVs: down 46.8%
Large SUVs: down 45.5%

This compared to:

Small (more fuel efficient) SUVs: down 17.9%
Crossover vehicles (Honda CR-V, BMW X3, etc): down 25.5%

And while passenger cars of all sizes suffered a 36.5% decline, SUVs of all sizes averaged a 46% decline.

It's safe to say according to data that the larger vehicles are less desireable, and that my statement is spot on.

If you don't believe me, go check out:

http://www.motorintelligence.com

or

http://www.motortrend.com

Either one will show you sales statistics that say one thing clearly: the large vehicle/large SUV market has suffered the worst because of their lack of efficiency and cost to operate in terms of fuel.

And if you don't like their research and facts, then go argue with them...not me.

QED

by jck

Most Americans have a taught feeling of entitlement because they're "American" and from the "land of milk and honey" and the "land of opportunity".

It seems the American psyche has shifted. It used to be a community-minded mentality from the settlement of places like Plymouth, MA and Jamestown, VA where people cooperated and did their part because it was what was best for them AND their community.

Now, most Americans have the mentality of "if I earn the paycheck, I can spend it on whatever I want that's not illegal".

Of course, this leads (mainly because of lack of giving a $hit) to overindulgences and the like.

Hell, I know. I do my share of spending what I shouldn't.

But when it came to buying a house, I didn't go get a 4 bedroom "just because I can". And when I went to buy a car, I didn't get a Porsche "just because I can".

And jd: anyone with any sense of doing right by themselves and the people around them (not just their own family btw)...will never have to hear from their neighbors about "cleaning up their yard".

Europe has been doing a lot of things better for decades, and I'm not just talking about beer. ;)

by jamesrl

First generation Tacoma (2wd regular cab):
Length 174 inches
Wheelbase 103 inches
Width 66 inches
Weight 3155lbs

Second Generation Tacoma (2WD regular cab)
length 190 inches
wheeelbase 110 inches
width 74.6 inches
weight 3550 lbs

It was classed as a compact pickup in the first generation, and a mid size in the second. 16 inches longer, 8.5 inches wider, 400 lbs heavier, 7 inches longer wheelbase. If you are an automotive engineer, as you have previous claimed, you will note that its a huge change in just one generation.

I could do the same thing with the Dakota, its wheelbase went from 111 inches in the shortest version to 131. 20 inches of wheelbase, pretty big change.

But hey what would I know, I'm not a master mechanic or automotive engineer.

And before you say I'm nitpicking you are the one who argued against what I was saying - you brought it up not me. My point still stands, same model vehicles are getting bigger all the time.

James

by jdclyde

If you work hard and are wise with your money, their is nothing wrong with having a nice house and/or car.

Mind you, getting over extended, declaring bankruptcy, and then starting all over again is NOT being responsible, nor earning what you have.

I just can not understand where you are coming from. I would not look down upon you or anyone for buying a Porsche, even if someone of your stature would probably look silly in one.... :D [i](mental image of HighTower pulling Mahonys front seat out of the car and sitting in the back seat for the driving practice)[/i]

People in Europe don't have nice houses? Where do you think the idea of mansions and castles COMES from? :0

How about the protectionist policies making it difficult for you to migrate to Ireland? Anyone that supports that idea in the US has weakminded fools try to portray them as racist.

Careful about looking at the grass on the other side of the fence..... Everyone has their pros and cons. Some are just better at hiding the cons because they don't have the scavengers that pass for media in the US.

by jamesrl

I don't think they are necessarily lazy. There were some studies done that showed that the CAW controlled GM plants in Oshawa were actually more productive than the non union Honda and Toyota plants in Ontario. But they also cost a heck of alot more, most in the cost of benefits.

Over the years the unions have come to demand benefits that added up to between 20 and 30 dollars an hour over and above their already considerable hourly wage. They have benefits like paid tuition for workers kids, spa days etc. The president of my company doesn't get those benefits.

They really did delude themselves that they were worth that kind of money. They lived pretty extravagent lifestyles. They spent like crazy.

James

by dadspad

were the engines of the late '78 and early 80's (incuding many imports) that were not prepared for the air polution requirements going in effect. The main thing were the anemic engines. The 80's gradually solved the problem and they became Demming disciples in the 90's.

When you talk about quality of cars in the US, you must look at the past and all makes not just some of the lemons all carmakers have occasionally.

by oz_media

In fact it is the new models that are the worst built. It's not a matter of air care or pollution control, those are surface add-ons and not the actual engineering and efficiency of the engine, though having an impact on combustion efficiency. Erupean models have had such pollution controls a lot longer than ours have.

The only advancement that is to the consumers benefit is crumple zones. Many people cry aout how cars used to stand up i accidents and new ones just crumple, well that's for a good reason as I am sure you already know.

Instead of being thrown around and against a steel dash, now teh car abbsorbs impact and the passengers are pretty well protected from the impacts, reducing internal, life threatening injusires by a great deal.

As for efficiency, our cars suck bag sompared to European designed. Our cars are NOT fuel fficient, they needlessly waste fuel energy by dissipatign it as heat because cheap manufacturing and engineering creates so much unnecessary heat from poorly comusted fuels. There is SO much energy stored in fuel, the idea of a good design is to get that fuel energy to the road. Close tolerances and superior materials ebsure European cars run efficiently and don't waste fuel energy.

US and Canadian models have poor engineering, cheap materials and they create so muhc heat from wasted fuel energy that they need little tin strips all over them to stop vital components from burning up.

That HEAT is simply wasted fuel energy, you PAY for your engine to get hotter than it needs, to take the energy from the fuel and dissipate it into the air as heat. It's a waste of money! But hey it makes a cheap car at the dealership so people line up in droves to buy them. The same build in Europe wouldn't last ayear before being ditched. People simply wouldn't buy it and waste their money on fuel.
Considering the cost of fuel in the UK, wasting potential energy and disipating it as heat is intolerable for most.

That's MONEY heating up the outside air instead of propelling the car it was bought for.

Our gas is cheap, so nobody seems to care if they waste the potential energy.

by jck

[i] If you work hard and are wise with your money, their is nothing wrong with having a nice house and/or car.[/i]

There is a difference between nice and excessive.

I can build a 2 bedroom house with a 9 car garage and 9 hole golf course on the property.

Is that just nice, or excessive?

[i] Mind you, getting over extended, declaring bankruptcy, and then starting all over again is NOT being responsible, nor earning what you have.[/i]

Actually, holding a job and paying your bills is earning what you have.

Although, you can't always control holding a job. We both know that all too well.

[i] I just can not understand where you are coming from. I would not look down upon you or anyone for buying a Porsche, even if someone of your stature would probably look silly in one.... grin (mental image of HighTower pulling Mahonys front seat out of the car and sitting in the back seat for the driving practice)[/i]

Exactly. Me driving a Porsche (basically because I would need to rip out the front seat to drive one) is just as silly as a retired couple in their 80s driving around a Cadillac Escalade. Other than just having it "because you can", what is the purpose?

Understand now? There is none, other than shallow vapidness.

[i] People in Europe don't have nice houses? Where do you think the idea of mansions and castles COMES from? shocked[/i]

Trust me. I stayed with a half dozen friends in Europe. Most homes are what they call "attached" which means...to Americans...they are condos or townhouses.

Only 2 of my friends (who lived in rural Ireland and rural England) had homes that weren't attached to another person's home. The rest lived in "council houses".

Are they nice? I guess, for some of them being 100+ years old. Well, my friends in Holland have a very nice one. But they take meticulous care of theirs (painting every year, new flooring every year, etc).

BTW, Castles quite often were NOT the home to one family. People having castles also had servants, concubines, and even live-in nobles from allied regions who lived with them. So to compare a European castle concept to a modern single-family dwelling situation is unequal.

And, castles were not owned by everyone. They were usually built by a noble.

[i] How about the protectionist policies making it difficult for you to migrate to Ireland? Anyone that supports that idea in the US has weakminded fools try to portray them as racist.[/i]

The EEC isn't restricting me based on race. They are restricting me on nationality.

And, I've not heard that the USA is portrayed as racist for the immigration policies in recent years. If anything, the USA is often portrayed as an easy place to get into...especially if you're willing to break the law to do so.

[i] Careful about looking at the grass on the other side of the fence..... Everyone has their pros and cons. Some are just better at hiding the cons because they don't have the scavengers that pass for media in the US.[/i]

Yeah, but take it from me.

Standard work leave in the USA: 80 vac/80 sick 1st year, or 132 PTO usually, plus 8-9 holidays.

Standard for my friends who live in Holland:
80 hours vac plus unlimited sick leave plus 13 national holidays plus a 2 week leave time for a "summer break" (that's how they explained it to me.)

My friend in Germany got about the same too to start.

So just to think. If I had to be out of commission and in a hospital any longer, I either would have had to cash in accts to pay my bills or probably lost my house.

In Holland, I would never had to worry.

So, see what I mean? Can you say that situation is worse?

Maybe the grass is greener there, and just the propaganda we're all raised on here in the USA isn't really the truth you've been brought up to think it is?

by oz_media

I know exactly how SOME portions of the union wor as I have worked with both the AW and the ADA unions in the automotive sector.

I have also worked for Teamsters and Longshormen's unions, and there is VERY little difference in them as far as being an employee is concerned.

In fact nobody really cares about or talks about their respective unions here, as much as I saw from teh US anyway, where it seems to hold more of a proud/prestigious role.

The key is secure pay, secure position. the rest of it, metings etc. are just crap that you need to attend once in a while to keep them happy.

the LAZINESS issue is always misunderstood by non0union employees and staff with less senority.

A new member is like fresh meat, "Great, less wrk for me!". But it is not a matter of being lazy, it's a matter of payign your dues. When you are new, you get all teh grunt work, bust your butt and live up to high expectations and constant demands to get on board and earn respect of others.

It can take years but eventually you see someoen else take over such roles and your job becaomes easier. It's like the whole High School or College Freshman to Senior routine.

Union wokers are actually some of the hardest working of all, they need to in order to earn their right and seniority.

certainly once that seniority has been earned, the responsibilities increase but the hands on labour decreases.

It's not unique to Auto workers, nor even unions. As I mentioned it is a simple seniority system, which is found in many private companies, family owned businesses and large corporations also.

People that have never worked for a union or in a seniority based system, simply have no idea what it is like or WHY people do less as they gain seniority. Those who live it, do and accept that they ocne were overworked and now have others to do that work while they are retained due to knowledge, experience to overcome more challenging tasks etc. They are held with a lot more responsibilty towards lesser experienced members. In reality teh enw guy who busts his butt has little to worry about beyond keepign your head down and just getting your jo bdone.

Senior members are usually responsile for the new guy's actions and development, while the physical tasks are reduced.

by oz_media

The SCAVENGER media in the UK is as bad if not worse than that in the USA. The lie spinners are everywhere, the tabloids and TV "news" shows are no different.

You just don't see as much fo it because you are sitting behind the veil of US media who ensures that you only get the information THEY want to feed you about the rest of the world. havign lived in eth US and UK, I have seen both sides of teh fence, it is VERY similar from a media perspective.

by oz_media

There is nobody IN the picture, just one hell of a beauty amp; sexy, sleek and simply divine!

I drool over it daily, I often check with IAVS for vintage gear (like my HK receiver), have picked up some great deals from them too, used to be a client of ours at one time before their business model changed.

by oz_media

I think you REALLY don't see it. I initially thought you were joking but you are actually serious, I think.

YOU gave me this big spiel that anything beyond a light truck was a commercial truck. Which is horsecrap.

[i]"In manufacturers terms ALL pickups are light trucks - Medium/heavy trucks are not sold in car dealerships."[/i]

Wiki facts:
"The compact pickup (or simply "pickup", without qualifier) is the most widespread form of pickup truck worldwide. It is built like a mini version of a two-axle heavy truck, with a frame providing structure, a conventional cab, a leaf spring suspension on the rear wheels and a small I4,I5, I6 or V6 engine, generally using gasoline."

"Full-size pickups in North America are sold in four size ranges - ? Ton, ? Ton, 1 Ton, and now 1 1/2 ton. These size ranges originally indicated the maximum payload of the vehicle, however modern pickups can typically carry far more than that."

As you just noted yourself, payload capacities and bed sizes grow all the time, just as they have done for full sized trucks, which you wrongly claim only includes commercial vehicles.

I'm not doing this all day again today.
If you cant' read and keep up with comments in a common English language, don't bother with me, I simply don't have the interest for your two-faced BS anymore.

by jdclyde

as to why each market is down.

also if you follow the link to get the excel sheet for new car sales, you see total sales for Toyota and Honda are DOWN more for May08 to May09 comparisons by quite a bit.

toyota -40.7
Honda -41.5
ford -24.1
chrysler -46.9
GM -29

If you look at the year numbers, they are closer.

Based upon your own link, the data for brand to brand comparison does not show GM the big loser as far as consumers voting with their pocketbook.

by oz_media

It is teh mid sized vehicels that have taken teh hit though. Mid sized cars today were the standard sedans in the 90's, Tarus etc. are losing their place in the lineup these days. People are mainly either buying compact or luxury/full sized these days.

With a price point well over the subcompact carm and build quality that doesn't match the luxurt cars, people either save their money and GAS by going subcompact or they spend a bit more and get the quality of materials and workmanship in a full sized, luxury car.It has happened in MAnY industries in the last 8-10 years, entry level products survivce, high end products survive and the mid market dwindles.

Ir even goes for new homes these days, I see the market, builders and developers every day. Spec houses are few and far between these days, but custom homes are still going gang busters as always. People with money still spend money, people in the midrange of teh market are spending less and being more wary of such decisions.

by oz_media

Your vast industry expertise would have also noted that the Mitsubishi/Chrysler 2.7L WAS also one of the most problematic and unreliable engines they ever put in a car.

http://dodgestories.blogspot.com/

You should tell them all about your friends down the street too, they all seem a bit lost in all thinking that it is a Mitsubishi motor. I suppose they can't read the badging properly and think that MITSUBISHI spells MITSUBISHI instead of CHRYSLER. Keeo in mind also that the Chrysler intake cover, with Chrysler stamped on it, does NOT mean it is a Chrysler engine, start pulling a few parts and you'll see who makes them soon enough.

Who builds it is irrelevant, who engineers it is the key. This is NOT an engine designed and engineered by Chrylser, it is a Mitsubishi engine. If YOUR plant down the street badged their 2.7's as Chrysler so be it, but there is no question at all that it is a Mitsubishi design, Mistubishi made them for installation in Chryslers and I have removed, repaired and replaced Mitsubishi motors from Chrysler cars.

by oz_media

YOU know tha I know Ford manufactures cars in eth UK, roght? I just finished explaining that to someoen else too.

"Ford has a plant in the UK, they build different cars than those built in North America, with a few similar models but also some that are very different."

Yeah, some peopel think that Ford build cars for teh UK, just like they do in North America, fact is we get utter shite in comparison to UK models.

by jamesrl

I personally did not define what a Light Truck is. I don't have that kind of power, and I'm pretty sure it happened well before me.

The US Department of Transport defined what a Light truck is. And they defined it as anything with a GWVR of 10,000 pounds or less which includes the most popular "full size" pickups, the F150/F250, Sierra/Silverado 1500/2500 etc. I've seen other descriptions that describe "light duty" as up to Class 3, but lets go with the Governments rating.

I'm not the only one who uses this rating and neither is the government. Clealy by the sales numbers they publish the rest of the industry does as well. The pages for the WSJ, Automotive News etc all show remarkable consistency.

Anyway the point of that post I made was nothing to do with "Light" truck classification, it was about the size of a mid size truck growing to near full size truck proportions, and cars growing as well. Do you deny that? Or do you want to yammer on about what you think a light truck is, which I presume is what most people call a compact or Mid size (which are in the Light Truck catagory along with the low end of Full size trucks).

Edited for spelling.

James

by jdclyde

I can tell you first hand, NEVER buy one.

as for mitsu, when I was 19 I bought a reliant Kcar. rode acceptably well, and while not sporty, it was a decent looking car.

Then the trouble starts.

it was sold with a 2.4, right up until the end of the year, then they threw a 2.6 mitsu piece of crap in it.

I would call for parts, and I wouldn't even be in the computer. Everytime I would go to the parts store, I would get the same "you're an idiot" look that WE give end users now. I would have to drag them out to the car to show them what I have......

it died. car still looked nice (clean), but engine was shot. :(

by slayer_

Entertainment show. The next episode in America (testing muscle cars) had to be considered a documentary and could not be entertaining at all.

So much fun that show.

by oz_media

They even got pulled over in Vegas and convinced the cop they were NOT being entertaining.

Meanwhile they are all sh*ts and giggles, pulling a straight face when they started to look like they were having too much fun. That's about the size of working on a show like that, TOO MUCH DAMN FUN!! I'd do it in a heartbeat though.

I thought that episode was great, Ford pulled th Mustang out of the test because they though it would be cutting and joking, so they just went down the road and BOUGHT one instead. LOL.

by oz_media

You know that's not Ford by any means though, they don't sell the Mustang and F-series in the UK, despite constant public pleas to do so.

Private import prices are dropping fast though, due to the weaker US dollar.
19,876.00 pounds ($just over 32,000.00 US)will get you a decent V8 Mustang. The smilar model in USD costs 31,000.00

So again the difference is only $1000.00 and most don't bother with the right hand driver cnversion, just as the Japanese and European 'third party' imports to Canada these days are right-hand drive too.

I know Clarkson and Hammond ranted about it, I watch TopGear religiously but that was a couple of years back now.

by tonythetiger

[i]A new member is like fresh meat, "Great, less wrk for me!". But it is not a matter of being lazy, it's a matter of payign your dues. When you are new, you get all teh grunt work, bust your butt and live up to high expectations and constant demands to get on board and earn respect of others.[/i]

Where the newbie is CLEARLY superior, both in quantity and quality, but can't advance because of lack of seniority?

Sorry, I don't agree with that...

If I'm creating more profit per unit of time for the company than someone else, regardless of seniority, I should be paid more per unit of time than someone who is creating less, and if the union opposes that, they are opposing ME, and therefore they are by definition not working in MY best interest.

Now if there's something that the more experienced person can do that the newbie can't, by all means promote the more experienced person... but spell that skill out in the job description, don't just say your promoting him because of experience.

Just as they shouldn't discriminate against someone because of a higher age, they shouldn't discriminate because of a lower one either. Measurable performance and/or ability should be the primary measuring sticks. Using anything else is less than ethical, and if the union were really working for me, they'd fight for that.

by oz_media

If yuo read your initisal comments, you were defending that MANUFACTURER'S consider all trucks light trucks. Now you are saying that it is a regulating body, which rates vehilces for safety and insurance standards.

Whatever James, oyu are all over the place just itching to make SOMETHING you say ring true, in any way you can muster, but you are a lost cause. You should really read your own comments before contradicting yuorself.

Like I said, don't bother, I don't care, you've lost your credibility on the subbject with me, you have made it VERY clear that you will simply argue any commenst I make just for the sake of argument, even if taken far off track.

Bugger off, get a life.

by oz_media

"Sorry, I don't agree with that..."

As I said, unless you have worked in or work in such a situation, it seems alien to most/ For those working in it, it makes complete sense. From a business model standpoint? Irrelevant. We are discussing lazy workers not business practices.

If someone walks in, has less experience or responsibility and works grunt jobs all day, he better NOT be getting paid what I am. If he is, they can lumber him with all my jobs and responsibilities too; I'll walk, leaving him to make mistakes, slow production, leave issues unresolved as well as all problems on the line.

by jck

You're assuming too much.

First point? May 2008 to May 2009:

It's a month to month comparison. I am sure I can find a month that would be different of the 4 others in 2008 and 2009 that are available.

In fact 3 columns over on that chart, they show the YTD numbers, and:

YTD SALES
2009 compared to 2008 and +/-%
General Motors Corp.
768,126 1,316,710 -41.7
Ford Motor Company
595,665 938,566 -36.5
Chrysler LLC
402,900 750,369 -46.3
Toyota Motor Sales USA Inc.
638,795 1,046,854 -39.0
American Honda Motor Co Inc.
430,358 655,819 -34.4
Nissan North America Inc.
289,446 446,474 -35.2
Hyundai Motor America
166,743 181,033 -7.9

Hm. Totally different boat there, eh?

Try comparing the whole year rather than just a period that suits the numbers you want to see. That's what I did.

You went off on me as being "anti-large vehicle" and I addressed the topic, and pointed out statistics to you that show that consumers were moving away from them more. Not because of manufacturer.

However, I just now showed you wrong too that so far this year, people are moving away from American cars at a more rapid pace as well. The statistics don't lie. And, you're wrong about that too.

Nice change of direction tho. ;) :p

P.S.- the numbers just don't get closer: they totally flip-flop. nice way to try and spin your point with numbers that contradict your stance :^0

by jck

I should be making $500,000 a year, since I make software that makes people do their job more productively, eliminates positions not needed and saves money, and automates systems so that tasks can be done without human intervention or error.

Hell, I should be rich. I want to work for you. When do I start?

by slayer_

I remember specifically it was the slowest car.

And James actualy hit the ditch while trying to accelrate without traction control.

So much fun.

by jck

A lot of times, people mistakenly throw a bottle in the trash they could recycle, drive a car to a shop a block away instead of just walking, etc.

That's an incidental occurence.

However when you live alone and have no need for a GMC Yukon Denali with the 350 c.i.d. engine with the optional tow package just to drive to the grocery store and the office, it's a long-term decision that not only impacts the environment but also your neighbors and others.

Do I do everything I can? Yes. I recycle, I use products made from recycled product, I turn the AC up during the day to not run as much while I'm not there, I unplug/cut power to things I don't want consuming power in stand-by, I walk to the store if I can, etc.

But, there are a LOT of people who don't even make a single effort or make one sacrifice of an unnecessary extra simply because they just want it for no practical reason.

As I've said before, I could have well afforded a 4 or 5 bedroom home when I moved to this part of Florida, could have gotten a big SUV when I bought 8 years ago, and could have built a swimming pool behind my house with a heater pump and all that.

But did I? No.

And why? Because it's not what I needed to live comfortably, and there was no practical reason for me to have any of those.

Again, it comes down to self-interest and self-indulgence of extras in life that someone could live without, but they "need" it because it gives people like that some kind of personal ego pump or feeling of self-importance versus the rest of the world that I guess they need to validate their life to them.

by oz_media

"As I've said before, I could have well afforded a 4 or 5 bedroom home when I moved to this part of Florida, could have gotten a big SUV when I bought 8 years ago, and could have built a swimming pool behind my house with a heater pump and all that."

I'll wear a dress on Saturdays, do the cleaning and ironing and housework. You got some dough for a bigger home with a pool in Flordia, I'm in. :)

by jck

But, I really can't fathom you're my type.

However, the 5'4 blonde haired brown eyed former volleyball player/softball player/tennis player/cheerleader/gymnast I've been getting to know [b][u]is[/u][/b] my type.

And to boot, she is smart and funny...and she likes me.

SOMEONE CALL RIPLEY'S!!!! :^0

by oz_media

that's right, it was the Challenger SRT8.

I got mixed up with Hammond's normal ride that he speaks abotu all the time, a US made Mustang.

Dodge backed out of the road test, fear that they would be put down and joked about by the UK's supercar boys.

by tonythetiger

[i]If someone walks in, has less experience or responsibility and works grunt jobs all day, he better NOT be getting paid what I am. If he is, they can lumber him with all my jobs and responsibilities too; I'll walk, leaving him to make mistakes, slow production, leave issues unresolved as well as all problems on the line.[/i]

Apples to apples.

by oz_media

But you must remember, in a seniority system, anyone with equal position of reposnsibiliy and seniority makes the same money while the grunt learns and gets paid less.

by oz_media

Bugs Bunny in a dress, a little odd but still adorable and funny.

I can play sports too, used to anyway, and she'll only get all fat and gross when she stops the activities anyway.

Not to mention I have a nearly non-existent gag reflex (probably too much information for you there, sorry.) :D

by tonythetiger

[i]But you must remember, in a seniority system, anyone with equal position of reposnsibiliy and seniority makes the same money while the grunt learns and gets paid less. [/i]

But often, the student learns more than the teacher knows, or he knew more in the first place, and used the entry-level job to get his foot in the door.

by jck

TMI :^0

Besides, she no longer is an athlete or cheerleader because of a back injury from an accident she was in a few years ago.

But, she's still 5'4, about 115 lbs, gorgeous, works for a bank, and is just amazing.

Did I mention that SHE ACTUALLY LIKES ME????? :^0

Heck, get Satan a winter coat cause surely hell has surely frozen over lol

by jck

I'd really like to know who I can convince, Tony.

I worked for a company once and brought in millions in R&D money from customers with my concepts, yet I was paid under $40,000 a year.

Are you saying I was swindled?

I wish you made the rules. Then I could sue them for back pay and interest and emotional distress. :^0

by oz_media

People here and their friggin semantic arguments make me puke!

"All solid lifters are shimmed in some form"
Horsesh*t, MOST have some form of adjustment but a 2.3L 4-cylinder, Honda's 2000CC Civic Motor, Volkswagens fox (mid ot late 80's) and MANY MANY others have NO lash adjustment, the only resolution, and recommended solution for lifters that don't pump up anymore is a replacement lifter. As it is easier to simply replace a lifter than to measure lash and adjust with shims until lash meets spec.

Your compression test now regards HOLDING pressure, which would be a full leak down test not a base compression test.

I don't need your module I use an Autotap system with my noteook.

replace block or bore? Sure in an older car or high performance car you can resleeve it. But in most cases it is just as effective to go over 30 thou and use oversized rings and pistons, as do all engine reconditioning shops. My '74 Cuda I restored could have even sleeved but I went 60 over and bought oversized pistons and rings. It shortened the stroke enough (which was square initially, with 188 intakes which I oversized to the 340 Dart's 202's) that when balanced and blueprinted I was looking at another 40HP.

Your plastiguage comments belong in a grade 10 power mechanics workbook, have no idea why you even mention it here. My point is that if yuo are going to check your mains, install new seals and replace/check lifters, why wouldn't yuo take the hour to pull teh motore and do it all properly? Teh way you are doing it is the type of thing you get from a recon shop mechanic on a time limit.

You are then trying to tell me what the purpose of the thread is, did you note who started the thrdiscussion to begin with?

It has NOTHING to do with specialists or generalists, it has everything to do with manufacturer lies.

You can pull that motor in 45 minutes, after which time you can replace and measure parts as needed with little effort. Replacing the motor takes as much as 2hrs including fills. Or at least that's the time allotted in the CAW service estimate, it ususally takes less time when you have done a few.

You make transmission to bell housing bolts seem to be a lot more than they really are. A 24" extension on an air ratchet and they are all out in 5 mins (I worked at a trans shop in 3rd year, VERY tight times and you learn to get it done FAST).

You should be able to pull a trans in a front wheel drive in aout 20 minutes, a rear wheel drive in less.

But you know all that, you just want to debate procedure and partially reconditioning your motor versus actually reconditioning it. I had a service manager who used to tell me ot do that, to save time, when I showed him that in the same time I can pull properly measure and recondistion the engine, and he could charge mroe for more replaced parts. that required engine removal/block planing etc, he soon shut up.

by oz_media

I just felt that your normal rapid wit was missing form teh prvious post, perhaps that's not a compliment. But seriously I usually find you much more astute and interesting/thought provoking to debate with.

by jck

Of course, I have passed the idea by her joining me on vacation both here and abroad, and she's quite open to it.

We might spend some time in TN in the fall, depending on her schedule and how her father is (he has a medical issue).

That goes well, I may well take her to Europe with me next to meet my friends who demand to know who this girl is that has all my attention . :^0

But, we laugh and talk every night. We really click. So, I might have found someone. We'll see if it's all for real in the coming months.

by jamesrl

US DOT says Light Truck are up to 10,000 lbs GVWR.

GMC on their website has all of their picks and Vans in their "Light Duty" Catagory, including some that others would consider Medium (TopKick GVWR of 17,500 lbs is listed as a light duty truck)
http://www.eia.doe.gov/oiaf/aeo/otheranalysis/fuel.html

Chevrolet's website is similar, they list light duty as up to the Topkick's equivalent, the Kodiak twith a GVWR of 16,500.

National Highway Traffic Safety Administration considers Light Trucks to be 10,000 lbs GVWR and under, but for fuel consumption ratings only applies the Light Truck standard (CAFE) to trucks under 8500lbs. So an F350 would be a light Truck according to NHTSA, but not have to meet the Light Truck CAFE standard. Think there was some lobbying going on there.

I do acknowledge that Light Duty as the manufacturers describe it and Light Truck as the government and others describe it are not exactly the same. But even with the most wiggle room Light Trucks (by the Governments lower GVWR standard) includes all compact and Mid-size pickups and most models of full size pickup. I've said that before, I will say it again. You can find all the GVWR for all the trucks you like and compare them to the 10,000lbs standard.

Does that help clarify? I don't think I've been inconsistent in how I've used these terms, though frankly I didn't think of models like the TopKick/Kodiak/F450 as light duty. I don't think you did either.

James

by oz_media

It's been doe for years, don't pretend you are all shocked as it is just now being done by Oabama. The constitution is a fair foundation a benchmark to live by, but to suggest it can be directly applied to life in the 21st century is ridiculous.

by jdclyde

see, as the world changes, their is a provision to change the Constitution to keep up with the times. They are called Amendments, and are the ONLY legal way to modify the original document.

The problem is unethical people with unethical agendas that they know will never pass if they try to go through the system legitimately are always looking for ways to go around the system.

As for Bush, I can't think of a single thing he did that took anything away from me.

Is this back about using existing legislation for wiretapping, that The Obama has said will continue?

by oz_media

And we all read the endless list of people against ANY possible ammendments to the constitution when THAT was nrought up. "We are not socialists, we are nto french, we are American and this is set in stone and should never be changed, all hail the mighty Constitution!"

Give me a break, you can't change opinions simply to suit the daily agenda, not everyone reading your posts here is American, some of us believe in consistency, integrity and values.

by maxwell edison

Living life on a foundation of individual liberty versus under an umbrella of tyranny is a timeless concept.

And before you dismiss my suggestion of tyranny, it means tyranny in any form.

You simply DO NOT understand America, Oz. You're not an American, yet you profess to tell us how to live and how interpret our constitution. Your comments are laughable.

by oz_media

Time to get caught up, you are falling behind.

First of all, I DO understand America better than you'll ever know. I was SO close to becoming an American citizen it's not funy, in fact its actually rather scary. I decided against it though and stayed put.

I don't tell you how to live or how to interpret your constitution. English language has but one interpretation, just because some people twist things to mean whath they would LIKE it to mean and support, it doesn't make it so.

We've all seen the kindergarten level of comprehension skills shown on this website by Americans for many years now, words speak volumes.

Laughable, perhaps. But only because facing the reality of your situation and the ignorance demonstrated by your governments over the years, more recent than historical, would make a grown man cry and rightly so.

Your constitution seems to mean whatever peple want it to mean at any given time. one day you are hanging onto the most carefully defined constutional rights as if every word spoken was one to be adhered to as the law of life. Then, when mroe ocnvenient, the entire Constitution is not investigated in its parts but summed up as "individual liberty versus under an umbrella of tyranny". LOL, THAT'S tha Max I was talkign about.
The one who can make such utter patriotic nonsense appear to be thoughtful and convincing enough that people see beyond the hypocrisy and view it as a lesson in history.

your consitution is so loosely defined and outdated that no matter what yuo want to support or discount, it can be interpreted to support your argyument. It's not teh work of founders seekign foundations and core logic to build a nation upon, it's the scripture of lawyers and politicians who put somethign forward that people BELIEVE they will live by, but has more holes than Swiss cheese for politicians and lawyers ot manipulate in their favour to support any given argument they choose.

Blin dpeople can't see it though, just like believers in God or any other specific deity; they are so wrapped up in just believing and havign faith, that they forget to question and apply reality and science to their beliefs to see if they hold water.

by jdclyde

GM, still most sold. Sales went down the most, but still have the most sales?

Ford still comparable to others for percentage of downsize.

And as a throwback to your comment about excess, just how much did you spend on your last guitar?

by jdclyde

that you will find a reasonable person to have your fair discussion with... ;\

As for typos, thank goodness FF has a built in speel cheeker..... :D

by jck

The last guitar I bought was right at or below $200.

I have almost always gotten used/consignment guitars I found. Only ever bought 3 new.

You're probably trying to refer to my Taylor K20CE I bought about 4 years ago.

Thing is, that guitar retailed for $4,498.

I can sell that guitar for $2,500.

I paid $2,000 for it. So, I can make a profit. It was a practical investment, as well as something that fostered a hobby and maintained my talents.

It doesn't emit sulfur dioxide, carbon monoxide, or carbon dioxide. It's pretty environmentally friendly.

Plus, Taylor guitars a number of years ago agreed to reduce the number of rare wood guitars they made in a year in an effort to conserve natural woods and make sure that they weren't raping the ecosystem or possibly eliminating the woods they use.

Besides, I've had that guitar for 4 years.

So, how much did you spend on your last set of golf clubs?

And then, how much have you spent in 4 years on golf outings (including drinks, meals, gas, etc.)?

Playing my guitar is free :)

Touche' ;)

by jdclyde

$50 out of a rummage sale, $70 for a used hybrid, and $50 for a Nike driver. Half of that is now being used by my boys instead.

So, the criteria is if the excess is eco friendly? I am sure many would say you don't NEED a $2000 guitar, and they would be right. It was a WANT, and barring your hypocritical standard on such things, you have every right to indulge in a "want".

Other hobby? I paid $40 for my darts. They emit zero emissions and will last for decades.

Then is my bike. Bought it 14 years ago for $250 and ride it at least 4 times a week. The only emissions are if I have mexican before a ride.....

Most I spent on a guitar was $650 as a birthday gift to myself when I turned 20, and it is my boys favorite to play to this day, even though I have 6 others.

by oz_media

On reasonable discussion I agree with you, though Max often perks my interest and I must admit has taught me a great deal about US politics, from his viewpoint at least.

We used to have a good dozen peers here who offered up very interesting debates and teh rule of thumb was al assertions were automatically suported with sources for validation, Max was part of that group and why I respect most of his opinions. We also had GuruofDOS who was grat and still sometimes pops in to touch base. Neil is interesting and very knowledgablein many areas, however he is dismisse dby many as his opinions are often read to be assertions of fact, as are often mine when they are opinions but people see them as me making factual assertions against THEIR opinion.

For the most part, TR peers are not what they used to be, but it's certainly a more coloruful bunch these days anyway. Half of what we say now would never have been accepted before.

by tonythetiger

[i]I worked for a company once and brought in millions in R&D money from customers with my concepts, yet I was paid under $40,000 a year.[/i]

The point is equal pay for equal results. In your situation, if there were multiple people with the same job duties, and your abilities made the company more money than the others, then yes, you should logically have been paid more than those others (even if all of those others had more seniority).

The purpose of business is to make a profit, so naturally, they won't hire you unless they think they'll make more money off of you than what they pay you. Their job is to get you as cheaply as possible. Yours is to know your own value and negotiate using that information.

[added: Think of it like you were a player on a baseball team.]

by jamesrl

To pick on one that Jeremy picked on the Cadillac CTS V costs 56,495 pounds or $91,750 by a UK importer(base price). It lists on GM's US website at $60,700.

The price I found for a Mustang GT Premium imported to UK was 34,500 pounds or $56,029 versus the US list of $30,500.

Pretty big gap to me. I've looked at the shipping costs to import Japanese cars to Toronto, and I know its around $3-4000 Cdn per car, less if you get a container load of cars.

James

by oz_media

I am sure I can dig for even higher import costs if I look, but judgign by teh importer I looked at today, matching two Mustangs for build and price on TODAY's figures, they were pretty much the same, small difference but nothing to run screaming from.

From americanimports.com
Cadillac CTS Sport luxury:
?28,750 SAVE ?1,245 from UK list
= 47,140.77 USD
US list from $37,585 - $59,730.

Some listed options like custom paint etc. were extra. but that's a landslide from your price of $56,495.punds which actually reflects a US retail price with full load!

I am not saying it's cheap to have cars hauled over from the US, in fact it is impractical and something only guys with many $ do.

But Jeremy and the likes on Top Gear exaggerate for a living, they are all just journalists looking for sensation afterall, journalists that landed killer jobs that is.

by jdclyde

And either passes or it doesn't.

Being off to the side, you are not hearing the story correctly. NO ONE that knows anything about the US Constitution will say it is written in stone, they simply say it is NOT a "living breathing document, open to interpretation".

If/when it does not fit, there IS a process in place to change the meaning.

Sorry if that gets confusing to you.

There was talk about an amendment to the Constitution to identify marriage as ONE woman and ONE man, but it didn't go anywhere.

It is NOT easy to change, and should not be changed on a whim.

You want a break, earn one by paying attention.

by oz_media

Last year we discussed SOMETHING that either involved amending the Constiitution or making an allowance.

Either way, the consensus from Americans was that it was a horrific feat to even consider an amendment. There was the argument that a democratic vote should change it, but that was said to be a sign of weakness that OTHER nations would do and not America.

by jamesrl

CTS V, which I chose because it was reviewed on top gear. Has an engine based on the Corvette engine over 500 HP. Lets try apples to apples shall we?

James

by jamesrl

They could have had a Mazda engine or a Ford engine. Friend of mine with the Mazda clone MX6 with th Mazda 2.5L V6 loved his and had no issues.

Other friend with the Probe GT had major issues.

James

by sleepin'dawg

Feeling a wee bit put upon are you now?? Not taking to the heat too well, are you??

Don't sweat it Sparky. Your a legend in your own mind and the epitomy of a loud-mouthed know-it-all barstard in everyone elses.

I'd bet you make at the very least, 15 posts to anyone of mine

[b][i]Dawg[/b][/i] ]:)

by dhcdbd

You do not understand the difference between a solid and a hydraulic lifter, you also appear not to know how a motor is installed in a B13.

You may be a certified Ford Truck mechanic, but I do not believe it and I do not think anyone else does either.

All solid lifters are shimmed or adjusted in some form because they do not rise to adjustment as do hydraulic lifters. Motors with rocker arms have a set screw for this adjustment, on motors with OVH cams shims are used. This is why they are called "Solid lifters." Remember that in OVH cams the cam lobe comes into direct contact with the lifter, therefore there is no place for a adjustment screw and because the lifter is solid the lifter itself cannot adjust. This now resorts to a recursive argument, so I will let it go.

You could possibly sleeve a cylinder on an aluminum block but you would have to be very very careful for a few reasons: thermal expansion characteristics between steel and Al (if you chose steel), ditto with iron (if you chose iron), ditto with Al; Al is a very malleable metal and the risk of deformation is high. When a sleeve is pressed in it compresses the material it is being pressed into. When that material is heated under normal use the Al. considerably expands and compresses itself. Add in the expansion of the sleeve. When the engine cools the sleeve is now loose. This is why Al. is no longer allowed in house wiring and against all building codes in the U.S.

If you choose to debate the issue of motor removal,I will be happy to scan either Chltons, Mitchells, or the Nissan service manual and send it to you.

by tonythetiger

There is a difference between nice and excessive.

"Nice" is what you want. "Excessive" is what you think the other guy shouldn't have. Who has the right to determine that for another? (Unless they're stealing from you to get it.)

[i]Other than just having it "because you can", what is the purpose?[/i]

Why does there have to be a purpose that meets with your approval?

[i]And, castles were not owned by everyone. They were usually built by a noble.[/i]

And "How dare he?", right?

by dhcdbd

You got off cheap. My last guitar, completed three weeks ago cost me $200 for the wood, $800 for the electronics and hardware, and 16 months of labor. Of course, it is entirely hand built - no machinery used other than hand tools, excluding a Dremel tool to polish the SS frets.

by delbertpgh

GM hasn't had alert management for forty years. Maybe fifty. A big part of the reason they've got union contracts that they can't live with is that management saw nothing else it could do but say "yes" to everything. That applies to relations with dealers and suppliers, and the way they have modeled their whole product development effort around a dying demographic, and leave the growing elements to foreign manufacturers. Somehow Europe and Asia can make a profit building small cars that are more fun, fit better, and burn less fuel, achievements that generally elude GM (especially the profit part.) Headquarters is some sort of imagination-free zone.

About the only people who can be trusted to buy GM's oversized products are Americans who are too fat to fit into a Hyundai, or who have such overwhelming inferiority complexes that they can't leave home without driving something that lends them an image of guts and toughness.

Every one of my cars has been a Ford, GM, or Chrysler product, except for a used VW bug (my first) and a used Honda Civic. I didn't think it was fair for me to spend so much American money putting foreigners to work, so every new car I ever bought (and most of the used ones) was U.S. I'm not sure that's such a valid idea any more, since half the parts in my U.S. cars seem to be imported, and half the foreign cars are now built here.

by jamesrl

When GM made over 50% of the cars built and sold in North America, it made some sense to provide a wide range of brands. But as the sales dropped to the mid 20s level, it made some sense to lower the number of brands. But other than dropping Oldsmobile, GM went and added to the number of brands in the last 20 years, not decreased.

Specifically, they bought Hummer, Saab and Daewoo, invested in Suzuki, Subaru and Isuzu. While Daewoo is the only thing they still own, you can tell that a big part of senior management focus was on acquisitions, not product development.

I had a conversation with a few family members on the weekend, one of whom lives in Oshawa, which is a big GM town. He was arguing for continuing to buy local to support the economy. I offered up that since Oshawa truck production moved to Mexico, would it be better to buy the Honda Ridgeline built in Ontario than the GM truck built in Mexico. Its probably something only a forensic accountant could figure out. The Honda has labour in Ontario, and some Ontario made parts, but drivetrain (engine/transmission etc) from Japan. The GM truck, which used to have Canadian built engines(they closed that plant too), would have Mexican labour and some Mexican made parts, some American made parts, and a small number of Canadian made parts. My uncle commented that the corporate profits would be in the US as opposed to Japan, but I'm not sure thats a big help to Ontario.

So I am a fan of buy what you want.

James

by jck

if we got down to "wants", i want a different job too and i can get it. does it mean i'm gonna just "do what i want" and bail on my mortgage holder on the hook?

Fact is, I got the guitar as an investment too that I knew wouldn't lose me money. It was safer than stocks...or would you argue that too?

Trust me. If it was just a "want", I would have spend $2800-4500 8 years ago in various other places i saww them to get the same guitar. But, I knew it would lose me money if I did.

As well, I had offers and was pondering playing gigs with some people so it would have meant income as well.

Hence, it was not just a "want". It actually served a purpose to have it more than just a bauble in a collection of personal items. It is a secure value item (unlike my house), and it can provide me an income if need be.

I don't suppose you were looking to become a professional golfer, were ya? ;)

Oh P.S.- I have played the guitar for others, so it isn't just sitting around in my closet. And if you want to buy a set of clubs, I have a set in the garage i'll sell ya for $200. :^0

And btw, there is a definite difference in a Taylor guitar and most lower-value guitar and it can help not only the sound instrumentally but can improve your performance.

Maybe you should consider shopping around for better clubs and improve your golf game if you're gonna go pro ;) :^0

by maxwell edison

People either pay it lip service or don't know what it really means.

Sorry, I'll never give up.

And after all this time, you still don't get it - and you don't get me.

by jck

you are the one that said:

[i]"If I'm creating more profit per unit of time for the company than someone else, regardless of seniority, I should be paid more per unit of time than someone who is creating less, and if the union opposes that, they are opposing ME, and therefore they are by definition not working in MY best interest.[/i]

Well:

1) I was non-union
2) I was one of 3 on the entire project who came up with a concept
3) Part of my original idea was used as part of a now commercial vulnerability tool
4) The other part has been implemented in other "sectors"
5) I received no extra, even tho I came up with the concepts on my own and none of the senior engineering staff, management,or executives contributed in any way to conceptualizing, developing, or implementing the software.

In essence according to your own standard since I made all that money for my time put in 100% doing it myself, I should have made the bulk of the income from the profits of it.

So like I said. When can I come to work for your union shop? ;)

by tonythetiger

and what is are often two different things.

Someone in your situation in a non-union shop might ask for a promotion and might have got it.

In a union shop, however, management couldn't promote you over those of the same job classification who were more senior.

Given the information provided, If you wanted a promotion, you should have asked.

by jdclyde

shoulder just won't allow it. Only was able to get one game in last year. Will have to try swinging the club and see how it feels.

More interested in buying a kayak, actually. One that can handle over-night trips. I would have one now if I wouldn't have gotten laid off. Maybe next year.

by jdclyde

Justify the purchase they way you want, you still could have gotten by in life without one, as most people do.

That is the key though, how DARE someone tell someone else what they need/want/should have or not?

Enjoy the guitar.

Know anyone looking for a seven string washburn? :D

by oz_media

Sorry to jump in, but it's not a matter of TELLING people what is right or wrong, it's a matter of assuming personal responsibility and not wasting resources.

Restaurants are non-smoking, but even wher they wre not, I didn't smoke in restaurants because people are trying to eat and I have respect for other people's choices as well as my own. Eventually there were enough inconsiderate people smoking in restaurants that it became illegal to do so. I don't think that's havign my own rights disrespected or trampled on though. Sometimes you NEEd to enact such laws because some people are just idiots.

As for castles and mansions, are you now going to equate accepting personal choices to the resulting wealth of a monarchy? I thought you were American and everything you stand for is basedon opposing a monarchy. MOST castles were built not as single family dwellings but as fortresses for entrie villages. Mansions the same, but were more for 100's of staff to be housed as well as the residents, who were mainly part of a monarchy.

by oz_media

Most of that car was built from a Mazda. The European models are most likely to have a Mazda 2.2L, the US engineered 3.0L didn't sell well due to excessive size. Even a 2.2 is a large motor for European compacts these days.

Was there a point to this excercise that I've missed or were youjust mentioning that Probes built in Europe used Mazda motors?

by jdclyde

Some could make the point of flying around the world to go on vacation is wasting resources.

Some say going mud bogging or trail riding with a motor vehicle is wasting resources.

Some say motorized watercraft use for recreational purposes is wasting resources.

Some say for the people that complain about that so STFU and go live in a cave.

Where is the line between waste vs use, and who is going to be the one to make that determination?

Here in the US, I see TheObama will be trying to make that determination FOR us.

by jamesrl

You were saying they had a reliable NA car, I was saying, may or may not be Mazda engine so that may account for the reliability.

Do you just start out with all my posts and decide to disagree?

James

by oz_media

I know nothing about what you are talkign about. I certainly wasn't aware there were different types of lifters and a B52 did you say? That's a pretty big plane indeed, way out of my league. I actually spent 6 years in school and 10 in the field so I could become a bicycle mechanic and am pretty good at oiling chains now.

Thanks for your waste of breath, you have proven your point, MAN are you ever friggin clever!

One goo dthing is noody here is going to have you "fix" their car half-assed to get them rolling for a few more months. I do feel for those who's cars you do fix though, exactly the type of mechanics mentality that people are so scared of when they take their cars in.

Now f-off and go waste someone else's time with your bullshit.

Get a life, a real one this time.

by oz_media

If you feel that flying once ayear for an annual vacation is a waste of resources, it IS but it is not irresponsible waste. Doing it once a month may be over the top though.

As for off road vehicles, it depends entirely on teh build, I've seen high performance buiggies that burn less fuel than a mid sized sedan. They usually burn cleaner too. Motorbikes? 2 or 4 stroke? makes a difference too.

The point is personal responsiility, you can drive to the store or you can walk to the store. Someoen being concerned about their carbon footprint would walk, within reason.

Someone smoking in a restaurant is disrespectful of others, so does that mean asking them NOT to smoke is infringing on their personal liberties?

If someone doesn't want to accept responsibility for their actions, they instantly jump on teh individual liberties bandwagon. 'I can be a pig because you've got no right to tell me not to be.'

Yeah, that's how countries like America become so divided, half give a crap about others, half care about themselves, end of.