Discussion Locked

Time/Date in Win98

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have weird thing happens to some of my PCs continuously running. Once in a while the date on them jump a few days ahead (time stays more -less correct). After I reboot PC and check CMOS, the date in CMOS is correct and when Windows comes up - thedate is correct too. Looks like Windows picks up the date/time during boot, but why does it jump ahead while running. Another possibility is that users change the date, but considering line of work we do - there is no benefit from it. Does anybody know about such behavior in Windows, and how to control it?

Thanks

GRiG

11 replies

by rgrowcock

If this is more than one computer, I would say that someone is playing with the settings. If the problem is only on one computer, you may want to check the power supply and make sure that it is not spiking. A surge in voltage can speed up a clock. Hope it helps.

by plg6

We've had several problems like this on our Dell systems with Win 98 SE. The cause is unknown but common across a variety of models and Win 98.

The workaround we've been using is to install an atomic clock synchronizer. There are some that can run periodically or some must be run manually. TUCOWS lists a bunch of these. Not as good as fixing the underlying bug in Win 98 - but we've found this a reasonable compromise.

by lin

I had a similar situtaion happen to me. Check your primary domain controller (pdc). That computer sets the time on all systems on the network. Make sure the time and the time zone is correct on the pdc.

by bodan3

Been there !!!
I would recommend you to look at answer 1 at first, then add that it dont have to be the computer itself.
We had a problem simmilar to yours and it happend on 23 computers of 900 at once.
The problem was the power spikes that the coputers gained from the wall outlet.
So if you cant find any problems with the computer be sure to have an electrician to look up the the current in the wall outlet.

\\\ Johan

This discussion is closed to new replies.