Most of the bandwidth consumption comes from the call traffic, which highly depends on the voice codecs you use, as well as on codec setup (normally you have a number of quality options to choose from). Common standards are: G.711, G.729, G.729a, G.726, G.728, and G.723.1. Below is a list of common data rates for standard codecs - those can be used to estimate bandwidth consumption when you know high/low/avg number of simultaneous calls you want to support. The problem, however, is estimation of those highs/lows - here you're on your own. The only thing I can suggest is get number of customers who will use VoIP from your business plan and use statistics from local telco to estimate number of simultaneous calls in peak/off hours for that number of users. Additionally, you should coordinate bandwidth purchases with purchase of gateways, switches, servers, PSTN lines, etc (there is little sense in buying bandwidth enough for 100k calls if your server/gateway can only suppot 1k). I mentioned that call traffic is the major part, additional traffic comes from call setup - and this depends on the VoIP system you use. See H.323 spec for some estimations.
G.711 A-Law 64,000 bps
G.711 u-Law 64,000 bps
G.723.1 5,300 bps
G.723.1 6,300bps
G.726 16,000 bps
G.726 24,000 bps
G.726 32,000 bps
G.729 ANNEX-A and B 8,000 bps
G.729 ANNEX-A 8,000 bps
G.729 8,000 bps
G.726 24,000 bps
G.726 32,000 bps
G.728 16,000 bps
G.729 ANNEX-A and B 8,000 bps
G.729 ANNEX-A 8,000 bps
G.729 8,000 bps
G.726 24,000 bps
G.726 32,000 bps
G.728 16,000 bps
G.729 ANNEX-A and B 8,000 bps
G.729 ANNEX-A 8,000 bps
G.729 8,000 bps