Question Locked

transparent recommendation?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is there a source to go to to find the correct transparency media for a specific printer? I am having difficulty trying to find the recommendations for transparencies for a Dell 3000cn and Dell 5100cn color laser printers.

I work as tech support for a high school and we have teachers who want to print transparencies. I am scared of the teachers loading the wrong brand or quality transparency into a printer having it melt. This happened once already with a copier.

Luckily the Canon photocopier they tried to use was still under warranty so we didn't have to pay when it needed to be rebuilt. The wrong transparency media fused it together. We now know the specific brand to use for this device. But I want specifics for all of the other printers.

So far all I can find from Dell is to make sure that transparencies are laser (color/laser) rated and to verify that the printer (on the printer's control panel) is set to transparencies.

Any suggestions?

4 replies

by nicknielsen

The only specification most printer manufacturers make today is the one you found: transparencies must be laser-rated and the printer set to print transparencies, if such a setting is available.

User manuals for your other printers are available from the Dell website. From the home page, go to Help and Support, then Manuals, then select the device type and model.

For your convenience...

3000cn - http://tinyurl.com/csqtn

5100cn - http://tinyurl.com/c77ux

by mc_user

I have already found those manuals and went through them. There are no specifications for transparencies in them. There is a one sentence footnote that tells me to go to the "User's Guide" but I can't find a copy of that.

It is just that these printers are out of warranty and I do now want to be the person recommending something that will fuse the printer. I would like to have something I can point to from Dell saying that this brand is OK.

by mc_user

The manual I was looking for was buried a couple of folders down the on the driver installation disk.

Selecting Transparencies:

The printer can print directly on transparencies designed for use in laser printers. Print quality and durability depend on the transparency used. Before buying large quantities of any print media, Dell recommends trying a sample first.

The Paper Type setting should be set to Transparency to help prevent jams. (See "Paper Type" for detailed information about this setting.) Check with the manufacturer or vendor to determine whether your transparencies are compatible with laser printers that reach temperatures as high as 205?C (401?F). Only use transparencies that are able to withstand these temperatures without melting, discoloring, offsetting, or releasing hazardous emissions.

This discussion is closed to new replies.