Discussion Locked

Tree or Server not found

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a number of sales staff that work from home and need to login to our NetWare 4.11 server over a phone line. They have Dell laptops with NT Workstation and the Novell client for NT (a mixture: 4.6 SP2, 4.71 and some 4.8). They dial-in via a Shiva box. A lot of them have been getting 'Tree or Server not found' errors. I have searched the Novell Support pages but none of the TIDs have helped. Does anyone have any ideas? Is there anyone else who has similar problems??

11 replies

by dcassat

You didn't say whether this has ever worked for you before... Is IPX enabled on the Shiva? Is the dial-in checkbox selected for those users on the Shiva? Have you elimated protocol issues on the workstations, IE: have you simplified the protocols to a single one or two? Good Luck.

by acurrin

Make sure IPX is bound to the dial-up adapter. It might also help to force the frame type to match the network.

by dlafrombois

Like the first answer, my answer is based on the fact that this is new service being offered. My organization has tried using an Ascend MAX 4000 to enable traveling ans HO users access to our IPX servers. We discontinued to the service because of the need for large amounts of bandwidth needed to serve IPX. Dial-up was not effective and resulted in to many problems. Check the connection speeds each of the users are connected with and if they are capturing printers. For me these were the causes of my headaches.

by drdon

Is the problem specific to just one of the clients?

When the Client was isntalled, was just the IPX/SPX portion installed or did you install the IP piece too? There is a difference between the Microsoft and Novell implementation of TCP/IP.

When they connect to the Shiva, are they prompted for another Log-IN?

Can they "browse" the servers on the network when connected to the Shiva?

Just something to look at.

by tomjockers

I have the same issue with my Shiva and a Novell 5.0 server.
The fix that always works is to use the IP address of the server in place of the server name in the client config. Don?t know if that would work with 4.11.

For IPX check the IPX options on the Shiva and the frame types on the server, client and Shiva.
Also you can watch the Shiva connection process in real-time with the Shiva utilities and see what protocols are establishing connections. I find many Shiva answers watching the connection process

Supply More info that may help:
Are the users dialing in first and then attempting to connect?
Are IPX and/or IP enabled on the clients, Shiva and server?
Can you ping the server with IP or IPX.
I have a static route set on theserver for the Shiva dial-in Network (for network 172.16.101.0 go to 17.16.64.190) 172.16.101.X is assigned by the Shiva (172.16.64.190) to dial in clients.

This discussion is closed to new replies.