Discussion Locked

Tuning NT

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On our NT 4.O file-server (SP5 installed) we have (unfortunately) also an application running which from time to time claims 100% of the CPU time. Very disturbing but I can't remove the program as it is important for some of our users. Is there a way to limit the amount of CPU time used by this application?

5 replies

by rgarner

The NT architecture does not allow you to allocate CPU to an application. The application must be written to use the CPU efficiently.

Try changing the "Application Performance" setting in Control Panel > System > Performance tab. Also, check your Virtual memory setting. It should be physical memory + 24mb.

If that does not help, move the application to another server.

by chicagonettech

The first place to control any application is in the NT Task Manager window (place your cursor over the task bar and RIGHT CLICK on any blank area or use the CTL+ALT+DELETE key combination & select TASK MANAGER to open)

Now, find the process listing for the application in question and highlight the process. Right click on the process and SET PRIORITY for the process to REALTIME, HIGH, NORMAL or LOW. In your case, if only a few uesrs are requiring the application, you should probably consider setting the prosess to LOT. If you have more than one processor, you can set the AFFINITY so it will only use ONE of the processors here as well.

The second place to check, and this will effect EVERY application, is the PERFORMANCE TAB in SYSTEM PROPERTIES (right click on MY COMPUTER and select PROPERTIES. Setting the BOOST to NONE will slow down the system useage of ALL applications which are run directly on the server.

This discussion is closed to new replies.