9 replies
by aljezairy Accepted solution
by michael jay Accepted solution
If you use the start/turn off computer does it power down correctly?
Also try holding the power off/on button for about 5 seconds.
by techbro Accepted solution
I have two guesses:
1) A Grooup Policy is set to always treat shutdown as a restart. This could have been set so the workstation is always available for overnight admin updates and whatnot; or
2) Maybe there is a setting in the BIOS that has the same effect? Like a previous respondent wrote, are you holding down the power button for 5 seconds to get a sudtdown? If you just press it quickly, you might just get a restart.
by rimper1 Accepted solution
I thought that something could be wrong with the bios so i resit it did not work then i reformated xp but it still restarts after clicking on shutdown and yes i can hold down the on off button for 5 seconds and it will shut down but that wornt be any good. any ideas???????? anyone??
thanks
by ict direct Accepted solution
Unfortunatly they did not solve my problem with this but they may be of help to you.
http://support.microsoft.com/kb/311806/en-us
http://support.microsoft.com/kb/320299
If anyone has any other ideas, please let me know.
Cheers
by aljezairy Accepted solution
by xt john Accepted solution
by ict direct Accepted solution
Hi
Slight confusion over the term 'Power Button'.
The original message refered to the Start / Turn Off Compter / Shutdown button in XP, not the actual power switch itself.
This works fine if held in for 5 secs. and the PC shutsdown normaly.
Kind Regards
by dr dij Accepted solution
put a bios password in.
that way, when it restarts will stop at bios password and you can turn off power.
this is good idea for other reasons:
keeps someone from using your pc when not there
(I had a roomate who tried this)
you know if your PC rebooted, might need to scandisk, etc.
the front button turns off power by software TRIGGERING the bios. it is not the bios initiating it. Something happens in windows that it stops sending the turn off command to the bios.
This can happen if problem in one of tasks it kills too.
you can put sysinternals filemon or procmonitor on, start it running and immediately shut down.
and when boots up again you'll have a log of what went on when it shut down.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending