Discussion Locked

Unable to create a new printer on NT

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Whenever I try to create a new printer on 4 out of 6 Windows NT 4 servers I get the error message:
The operation could not be completed. The RPC server is unavailable.

The RPC service is running on all 6 servers!
What can I do to create a printer on the other 4 servers?

Thanks,
Kostas

9 replies

by harilata

The message often indicates resource constraint. Check/change pagefile settings etc. There is a limitation on number of files on a FAT C: drive; this may be creating problem with the pagefile.Also refer www.microsoft.com/technet

by for7676

Log into the server locally, then stop the RPC service, wait 30 seconds and restart the service.

by kphysentzides

I had already done that but it didn't help.

By virtue of saying that 4 out of the 6 servers running RPC are unable to create a printer, it should signal that it is not just SIMPLY a matter of a corrupted service. Not on all 4 servers at the same time!

by mcse-az

RPC Service Unavailable Error After Upgrading from NT 3.51 to NT 4.0 with http://support.microsoft.com/support/kb/articles/Q246/5/23.ASP

Probable: missing dll's http://support.microsoft.com/support/kb/articles/Q242/0/79.ASP
Did you add the TCP/IP printing service or it might be the Simple TCP/IP service?
Upgrade to SP6a for NT or is running Terminal Services SP6 that will generally take care of the problem besides uninstaling the RPC service & reinstalling - if not what is on those servers, etc... Did you add the TCP/IP printing service or is it Simple TCP/IP service?
Why do you need 6 servers to have printers on them? Unless you are a humongous company, 1 or 2 file & print servers will generally work out just fine & if you need to print, add the printer using a network printer.

by zephyros

I saw this on some of our servers -- using servers to hold the printer definition so that printqueue management is centralized. Turns out that if you're using Microsoft TCP/IP Printing and you make any add/remove change to network settings (adapter, protocols), you'll get RPC errors until you reapply the Service Pack (3 or higher).

This discussion is closed to new replies.