Discussion Locked

Unable to Ping Server

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have some (not all) users who are able to ping every network user except the server. When they attempt to ping the server using the servers DNS name the ping utility returns the users ip address. They can even ping the BDC but not the PDC. We are using TCP/IP with Windows 98SE and NT Workstation. Would appreciate any suggestions. Thank you.

8 replies

by arwjnplanotx

Can you ping the servers IP address? You said you are trying to ping the servers DNS name. Do you have DNS installed on your intranet or is the DNS name registered on the internet? Are you sure you are not trying to ping the netbios name? If so, I would assume you have WINS installed. Make sure the PDC has the correct information for the WINS server in its TCP/IP properties under Network properties. Also, if you are using DHCP, make sure the correct WINS information is being assigned by the DHCP server. You must have the following settings for the WINS server information in the DHCP properties:
044 WINS/NBNS Servers - < IP Address >
046 WINS/NBT Node Type - 0x8
Run winipcfg on one of the Win98 machines and verify all of the information is correct. Run ipconfig /all on the NT Workstations and verify all of the information there is correct.

This should give you a path to follow. Good luck.

Al

by lewey04

Are you trying to ping the Netbios name? I would try to ping the server by address to try and determine if you are a having a name resolution problem. (I assume that is the problem) Then check your Wins settings and DNS entries to see if they are setup correctly. Answer #1 had some good suggestion about WINS and I would check my lmhosts and hosts files if you had entries to your servers in there. Good luck.

by administrator

The first two are good suggestions but if they do not help try this. first is thier any aplications running on the server that are utilized on the network? and can users get to them? if so then the issue could be a corrupt tcp/ip protocal see if youcan ping the local machien 127.0.0.1 from the server run the ping command if it times out then thier is a priblem with your config localy if it works and you get replies then try to ping out to other workstations and other servers from that server, again if it times out then then it is a good chance that it is a hardware issue if this is the case i would swap out the nic and run the test again. if it dose not time out when you ping out then i would have to say that it is a dns/wins issue.
hopethis helps.

John C. Stacy

This discussion is closed to new replies.