Power On Password [POP] removal
The simple procedure for POP Removal is FREE, it is fully described in your TP's Hardware Maintenance Manual.
Download the TP T40 Hardware Maintenance Manual
The downloadable Hardware Maintenance Manual is in PDF format. To view PDF files you must have the latest version of Adobe Acrobat installed on your system.
read the Hardware Maintenance Manual, search for "POP Removal" and follow the instructions.
The POP removal procedure resets the TP's Real Time Clock [RTC], when the TP is next switched on following POP removal [or if the small backup battery is removed or goes flat] your TP will display errors 161 , 163, 250, 251, 260, 270, 271 etc and insist on going into BIOS set-up
If you have followed the POP Removal procedure and you are able to enter BIOS set-up without being confronted with a password prompt and you are able to set the correct date and time [and all the error messages have simply gone away] then your TP does not have a Supervisor Password set.
POP has been removed and you still have a password prompt
You have followed the POP Removal procedure and you have switched on your TP to discover that once again you are confronted with a password prompt.
Now we need to rule out the possibility that your TP has a password locked hard disk and no Supervisor Password is set.
Hard Disk Password prompt
Is your TP displaying the Hard Disk password Prompt?
YES, we need to check that there is also a supervisor password set to possibly confirm that the hard disk password can be recovered form your TP's eeprom.
This is how we check for presence of a supervisor password in your TP.
Switch OFF your TP.
Consult the TP T40 Hardware Maintenance Manual for details on FRU "Hard Disk Removal".
Remove the hard disk drive from your TP.
Switch ON your TP.
See the following address
www.ja.axxs.net