Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi, I am wondering if anyone can help me regarding an annoying issue. Everyday in the office one of the laptops will not connect to the network. But when I change the wires from the port patch to the hub, the laptop will connect back to the network.Now I can't really diagnose the problem because the person who uses the laptop wants it connected straight back to the network and he is my boss, so I can't complain. But what can the issue be? Please help someone.
5 replies
by bill
Have you tried using another 'port patch' connection? or a different hub port? These things can and do go bad, and usually with the boss's unit!!
If changing the port patch does it, the problem may lay in an intermittent problem in the connections to the patch jack. Have your wiring folks redo the punchdown.
Obviously if placing him on a different hub port (which you should try first) resolves the problem, you've got a hub port going bad, just tape over it and mark it off as bad.
by dave.raj
Poster rated this answer
by mostakim
Change your HUB, few HUB does-not refresh itself when a client dis-connected, use 3Com HUB.
by dave.raj
Poster rated this answer
by dave.raj
This question was closed by the author
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies