Discussion Locked

Upgrade

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am attempting to upgrade a pc from win95 to win98 or win2k. In attempting to do this, i get the error message d:\win98suwinhelper.bin not found. Please provide insite.
Thanks.

5 replies

by hereinoz

Sounds like you have either a dodgey CD or a dodgey CD Drive. Try changing the Cd drive.

Have you tried it on another machine, even just putting an old hard disk in another machine and trying the install in that one will help you narrow down the culprit.

by n2pcees

I don't think the drive is bad. I initially reformatted the hard drive and loaded win95. I think there is another step i missed when installing win95. Maybe adding a drive or formatting a drive.

by cul8rm8e

i agree it sounds like u have either rom drive problems or a crap (illegal) copy of the os.. however if you do decide to try re-installing the os on the HDD from another pc, do not put the HDD into the "x" pc after installing the the os from the "y" pc as it will not load as the CID's from the other pc will be installed onto the HDD and will try to find them. which will cause fir it not to load

by dkzgambo

try reading another CD.e.g a musical CD and see if it will not jam. If it does, then ur CD-RW drive has a problem. If not, check for scratches on your CD. It could be that its failing to access the file.

by n2pcees

Thanks for all the comments. They were all valid and i got the problem worked out.

This discussion is closed to new replies.