Discussion Locked

Upgrade from hubs to Switches

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Within the last year we switched from Novell to MS Small Business server and upgraded our servers to two Compac Proliant 500 Mhz servers. We have about 40 users and find that our connections are still slow. Now we are being told to change our hubs from two DynaStar 24 hubs to a cisco 3548. We need expert advise or assurance that we are not being sold on another change with little results. Is this the correct way to go and what will be the results?

3 replies

by shmaltz

The switches will do a great job in network perfomance.
I work at a place where we have allmost the same setup, 40 users and 4 servers.
We used to have 2 hubs and NETBeui as our LAN protocol I added to that 1 switch and connected all the servers (even printers that run on the network) to the switch and all the clients are still connected to the hub and the network is much better now (a client that share anything even just a printer is also connected to the switch), I also swithced from netbeui to TCP/IP and WINS I stopped using netbeui.
So the answer is yes a switch is much better, if you can afford switches for all you computers do it, if you want you can test it and get first just one switch and do what I did and see if it works for you.

by randy

Thanks, Although your answer was reassuring, it did not addres the specifics of the cisco 3548 in our configuration or what the results will be.

This discussion is closed to new replies.