Discussion Locked

Upgrade NT4.0 to Win2K Server?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can someone help me find good documentation on upgrading my PDC and BDC servers from NT4.0 to Windows 2000 Server? I manage a simple network. It consist of single domain with a PDC and a BDC and about 60 workstations. The main functions of the servers are file and print and server based applications. Thanks for any help.

5 replies

by gbworld

The best place to start is:
http://www.microsoft.com/windows2000/upgrade/default.asp

This gives good guidelines to updating your network and will help identify hardware problems prior to the upgrade.

The upgrade, in most instances, is fairly straightforward. I would still do it after hours, as it is a bit time consuming. You can reduce this by copying the CD install directories to the network and running it from there.

The bigger portion of your conversion is going to be making sure you leave your domain in mixed mode until all NT and 9x machines are converted to Windows 2000. If you are using profiles, you will have to maintain older profiles for NT/9x users.

Here are some other resources:
http://www.microsoft.com/TechNet/win2000/upgradin.asp
http://www.microsoft.com/TechNet/win2000/upgrnt.asp -- covers PDC upgrade

Good luck!

Gregory A. Beamer
MCP: +I, SE, SD, DBA

by remeltdb

In addition it would be a good idea to make an image of your PDC before doing the upgrade - just in case...

In fact, you should also do that for each of your Win2k domain controllers before turning on Native Mode since that is a one-way switch and you can't go back.

Use Ghost or Power Quest Drive Image.

This discussion is closed to new replies.