Discussion Locked

Upgrading an older system

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Probably a simple question for someone out there. I have a Compaq computer, Pentium 100, 16 megs of ram. What is the highest processor i can place on the motherboard. I have heard that 233mghz is the highest. Is this true? And if i can only putin a 233 how much of an impact would it be if i put in 128 megs of ram? Any other suggestions for upgrades will also be accepted. I am placing a lot of points up for lots of quality answers.

5 replies

by syscokid

Depending on your processor's socket size, you can get up to 200Mhz, maybe 233. Anything more and you'll need to replace the motherboard too.

As far as RAM goes, depending on price 128 is ok but the speed added per dollar over 64 oes down significantly.

Here's some reading:
Interesting Articles:

http://www.quantum.org/members/issues/0998/8009.htm
http://www4.zdnet.com/zdnn/stories/news/0,4586,303666,00.html
http://www.j-corp.com/techhelp/mlb/socket.html

Interesting message thread:

http://www.intermktg.com/wwwboard/messages/21274.html

by parkerbrother_04

you are right. it does only support up to 200mhz or 233mhz. That 33mhz is not much difference and you wont be able to tell. You might have to purchace a new motherboard thats supports a processor better than a 233. AMD k6 II or III,pentium III, or celoron are some of th emost heard names for processors. Your memory does have a factor in your performance but wont be one when your talking about how fast your computer runs, but it does help if you atleast have 64 or 128MB or memory. You can even keep your memberchips and put them in the new board if compatable

This discussion is closed to new replies.