Discussion Locked

Upgrading coax network to cat 5

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We currently have our NW 4.11 network running on coax cable. I'm looking into upgrading at least the main part of our network to cat 5, and have some questions I hope someone can assist me with.
Planning on using coax as backbone to hub in a central location, then running cat 5 cables to workstations. Any problems with this? Know switches are supposed to be better than hubs, but can I hook the coax to a switch? (media converter use, maybe?) I can get a hub that will connect to the coax directly. All this needs to be done as well as can be done while not spending much!
Thanks for any assistance-

7 replies

by kevin anderson

Going to a hub isn't the end of the world... Especially if you don't have very much traffic on your network.

You could likely find a coax Switch. Coax kinda died a while ago, so it isn't really supported on most hubs or switches anymore. I have to ask though, why not run the CAT 5 from the hub/switch to the server? ( can you move the server to the central location where the hub will be? If you can do that, you'll benefit from running the Server at 100 Meg Full Duplex to the switch, and then switching 10 Meg out to the desktops(preferably full duplex as well, but some NICs don't support it) .

Personally, if you have to pull everything all over the place like this, I'd recommend looking at fiber. It sounds much more expensive, but depending on your physical network layout, it isn't. It's capable of faster speeds, and longer distances, so you don't need wiring closets and stuff.

Kev.

by jessie

If you want to move upto 100mbs you will have to get rid of all the coax. There is really no benifit in spending the money to pull the wire and upgrade the client machines if you are not changing the entire network(what good is faster connections if the server conection is still running at lower speed). moving all the network to cat 5 will allow you to upgarde to gigabit speeds in the future. I would not plan my network with any coax as alot of network vendors are no longer supporting it on hubs and switches.

by estebandelatorre

If you have only 5 ws, you can use a HUB like the 3com OfficeConnect Hub 8c It has 8 rj45 and one coax input. It allows to mix coax and rj45 environment as you need.
About 100 U$S.

edt@bancobgn.com

This discussion is closed to new replies.