Discussion Locked

Uploading of Cisco cfg files

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Cisco 4500 with two fddi cards and 1 4 port serial card. I am having problems with uploading my config file to it. I had a router fail over the weekend and I am unable to upload my config file. I am having problems cutting and pasting itinto the router. I am using hyper term to get into the router. When I paste it into config mode I get some formatting issues. I think that it has something to do with notepad adding carriage returns to the config file. I was wondering if there was different text tool or Term-emulator that I should use.

5 replies

by ckilday

Chris,
I've used wordpad and hyperterminal without any major problems. Sometimes, if I'm copying a long configuration, I run into what I would say is a speed problem...it's like my pc is downloading too fast for the console port to handle it, but there's no flow control established. The config command syntax gets mangled and when I review the running config, it stops at the last good command. When that happens, I break up my copying into smaller chunks and everything works fine. Just out of curiosity, are you removing the exclamation points between sections and removing the extra spaces from in front of an interface's subsidiary commands? It's possible the formatting cisco software uses to display the config could be causing you problems if you try to paste it back in. Hope this helps. Best wishes,
ck

by jmorris

I would recommend 2 solutions.

1. Setup a TFTP server on your machine...if you have the file locally you can copy from your tftp server to the running or startup config on your router, with network connectivity. Th TFTP server software is a free download from cisco.com.

2. I've used Windows 2000 command prompt telnet for a few years when connecting to my routers. The great thing is being able to size the length of the window and scroll back and forth across it. You can copy from and pasteto the window as well.

I hope this helps. I think it's a great idea to put a TFTP server application on the admins machine for backing up the IOS and running-config of any routers/switches/hardware you may have on your network.

If you need anymore direction on this feel free to send me an e-mail directly.

This discussion is closed to new replies.