Question Locked

USB Write Protection

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I am trying to copy files from my pc to a sony 1GB MICROVAULT USB stick and when I drag the file (which is saved on my desktop) to the USB window is says that the file can not be transfered and I need to remove the write protection or use another disk.

Does anyone know a way around this so I can drag the required file straight on to my USB stick?

Thanks in Advance!
PA

4 replies

by deadly ernest

In the situation you discuss, there are four areas of write protection, and that error message will be triggered with any one of them. Tow on the drive, and two on the computer.

1. The USB drive itself.

Most USB drives have a very small slide switch on them that's used to provide a physical lock to write protect the drive. Not all have this, but most do. Check the drive and try the switch's other position. On one of my USB drives, I need to get a pin to move this little bugger, it's too small for my finger nail. Another one has a nice big switch.

2. The USB drive software protection.

Some USB drives have a software write protection, and this can vary on the way the system has been formated and set up. usually, this is activated by the computer's protection systems at the time of formating the drive.

The common cause is something like, the drive is formatted while in user Fred, and you now want to sue it on a machine with user Harry. The drive's original software set up is that only Fred can write to the drive. To get around this, you need to go to the original machine and ID and ensure the write protections for the USB drive folders are all set for anyone to read, write, and execute.

3. The Protections on the Originating File or Folder.

Depending upon how the originating file or folder is set up for user permissions, it may not allow you to copy it to any where else. I've seen this where files are set up to allow anyone to execute, but only the originator or the administrator can read or copy or write.

4. The permissions on the operating system

This can be a real issue. Some corporate machines are now set up to allow people to read from USB drives, but not copy to them. Again this is a permissions issue and you have to be logged in with the right ID to be able to go to the setting and change this. Where the setting is will vary with the OS, and what application is used to do the locking.

--------

I can only suggest you check the access permissions for the file, the device on the system, and the folder you're going to.

One way I have gotten around some of these sort of permission lock downs is to open the file, and use save as, pointing at the new location. It may then save at the new location with updated permissions.

by adnan_ahmad

How do i remove the write protection error message from my usb flash disc

by ron k.

in a years old thread and see how long it takes to get a pertinent answer.

This discussion is closed to new replies.