Discussion Locked

users getting disconnected

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

A company in Milpitas is having netware 5.0 problem where the users are getting disconnected from the network. It happens most of the time when they print or are transferring a large amount of files. A message they may get is a netware security message- request to the server timed out. There could be network congestion or the server may be down. Try the operation again later.

Previously they got messages from the policy manager [5.00-015]- Unable to obtain a connection license unit. Operation will continue. Contact your network adminsitrator to verify that licensing services are functioning properly and that license units are available. Error #C0001006. - this hasn't happened lately however.

The customer had a novell 3.12 server with 50 users before. They bought 5.0 upgrade with 5 client licenses. Then they bought two 25-user upgrade licenses. I have deleted the 5 client licenses and now just have the two 25 user licenses installed- I thought it wasn't picking up the 2nd 25 user licenses because the 5 user one was locking out the 25 user license.

some messages the appearing on the console after I turned on Nls trace are:
56: DS overwrite c63994d3 :ant:1 lastUpdate:969466731 DM:CN=Shannonm.OU=hq.0=innerstep

does this mean they are losing their connection license for some reason? the licenses have never gone over 35 used and I think there are more people connected than that.

Recently the company had merged trees with a tree from Austin- the two companies are still separate on the tree. Austin has their own server with 15 SCL and one server. would this affect licensing at Milpitas?

7 replies

by acurrin

Have seen similar problems even under NW 5.1. The latest NLS service pack alleviated the problems.

Also, confirm that the licenses are appropriately assigned to the server in NWAdmin. If they are not, the NLS service pack is a good bet, or remove and then re-install the licenses.

by wayne

We have been experiencing this exact error with our NetWare 5 servers. After patching with SP5 the problem is greatly reduced. However, if you're running NDPS (printing either w/ IP or IPX) you'll still continue to see an occasional occurance of theerror. (C0001001 or C00010006)We have sinced reverted to que based printing and have not noted the error since.

Hope this helps!

by rmount

A few Suggestions:

- Update the Novell Client to the latest version.
- Apply NW5SP5, make sure to follow the readme, you'll need to remove your licenses and reinstall them after the patch is applied.
- Lastly, have your wiring tested/certified.

--Rob

by slee

removed the 5 user license that came with the 5.0 upgrade. had to restart server- problem fixed. thanks.

This discussion is closed to new replies.