Discussion Locked

Using Multiple IP address in a single PC

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have several new Laptop PCs. I would like to be able to use these PC at any of our stores and the home office. We are using NT as the network. The home office is DHCP or TCPIP. The stores are TCPIP only. Each store has a router. I want to beable to roam from store to store without have to change the IP settings on the Laptop.

Is this possible? How is it done?

9 replies

by seanevans

First things first. DHCP is the protocol that issues ip addresses to clients within the network. tcp\ip is the protocol that the packets ride on. Are you using another protocol such as IPX?
If you are using only tcp/ip and dhcp is used at one domain\segment you can do the following. At the dhcp enabled sites you can hook up to the network and receive an IP address automatically. At the non-dhcp sites you will have to enter an IP address manually.

Even better is if the sites all have routersand are connected as a WAN why don't you connect from the head office. All you may need to do is edit the routing and make sure that the permissions will allow that type of access.

by donita.martin

We have a similar situation with co-located social workers needing access to the county office network from the various schools in the county. We run a strictly Novell network and aren't presently using DHCP at all.

We edited their config.sys file to load a menu when they first turn on their laptops. They have a choice of schools or the county office as the locations that they may choose from. When they choose the location that they are at, it triggers a batch file to
run that edits the registry and enters the correct IP address, subnet mask and gateway for that location.

We obtained the correct information from the appropriate schools IT personel. They needed static reserved public IP addresses and internet access to access IP driven applications. We recently implemented VPN and now they can login to the county network and access any county application that they need.
Of course we ran into a few problems with various schools firewalls, NAT and security issues.

If you feelthat this might work for you let me know and I can share more detailed information with you.
Donita

by bf9

1. If you own the routers that you are wrting about and if they are cisco routers, you can configure the so called "mobile" routing protocol. Refer to the documentation. So you do not have to use DHCP anywhere for your laptop.
2. Configure one central site (server) for all DHCP requests. I assume that you have the IP connectuvity between all of your sites. Make routers forward the DHCP/BOOTP broadcasts to the one, pre-configured server that will handle all the requests from all the users. Theip addresses will be assignet accordingly to the place (IP subnet) where the DHCP request is coming from.

by chrisamcp

You state the stores do not have DHCP. If you have enough connectivity between the stores, you can enable DHCP Relay on the router. This will allow you to automate all the ip addresses at the stores also. If you have NON-BOOTP enabled routers, you will have to install a DHCP Relay Agent at each location in order to talk to the DHCP at the main store. The DHCP Relay will allow you to talk to the DHCP server across a wan link using a directed unicast versus broadcast which is stopped at the router.

This way, when you move laptops from locatin to location...you would automatically be assigned an address for that particular subnet.

If the routers are seperated by subnet...which is most likely the case between stores and you have no DHCP connectivity to each store, you will be stuck manually entering an IP address into the laptops each time you visit a new store.

Chris Arsenault
Network Administrator
Houston, TX

This discussion is closed to new replies.