Question Locked

Using pppoe internet and lan sharing using netgear wifi router

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using windows xp pro.
My query is i have broadband net connection using pppoe to connect net services which uses my user id and password + my network card MAC address as authentication with windows pppoe dialer. Recently i bought netgear wifi router but when i insert wan wire from isp to internet port i can login and share net on my wifi and other wired pc but i cant share files or play games with other members on my lan network outside my router. If i insert wan wire in any one of my lan ports i can only surf net with one pc which has dialed the connection but can share files outside lan . Please give any suggestion so that i can surf net on all pc connected on my router at the same time share files with other lan pc outside my router.

HOPE SOME EXPERT HERE WILL HELP ME.
THANKS

4 replies

by 1bn0

And I read it 3 times.

"same time share files with other lan pc outside my router."

The purpose of the router is to allow the computers on the LAN ports, "your network" share the WAN "internet/outside" connection. It also blocks unwanted traffic from entering your LAN (inside network)

Your post starts out sounding like you have had one P.C. using a broadband modem to access the internet. You then bought a router to allow you to connect another P.C. to the internet connection.

Your post ends with a statement that makes it sound like you are putting a router on a LAN (someone elses, not yours e.g. Campus or dorm connection) so you can connect more than one computer to that connection. Which is it?

**********************

" i have broadband net connection using pppoe to connect net services which uses my user id and password + my network card MAC address as authentication with windows pppoe dialer."

I will assume this statement inicates what it says. You have one computer on a Broadband connection and now want to share it with another computer. The router is the correct first step.

"+ my network card MAC address as authentication"

This is often used by Cable Internet Service Providers. The modem will only allow the first computer attached to continue connecting to the internet. It stores your computers MAC address and verifies it for all future attempts. CAble ISPs do this to try to cahrge you for extra IPs' for additional machine.

To overcome this limitation you need to look for a setting in the router to "SPOOF" the computers MAC address. This will tell the router to use the MAC address of the computer currently on the connection as the MAC address of the WAN port when connected to the modem. This will make the modem beleive the router "IS" your computer. If you are using a PPPoE dialer on your P.C. yu will have to configure the router accordingly. Once the router is configured you shold not need the PPPoE dialer on your computer to connect.

Be sure DHCP is enabled on the router. It usually is by default. Then change the computer LAN connection to DHCP to get the network configuration, IP address DNS sever, etc from the router.

by vipin786

Thanks for ur reply but just wanted to confirm is there any possibility.

by tintoman

unless you answer 1bn0's questions.
We will need to make sense of your question before any advice can be given

This discussion is closed to new replies.