Coax was good cheapnet but todays standards you would not want to use it.
I run 2 mini-6 for DS3 but that equipment is designed with a BNC connector.
Screened Twisted Pair STP is good to eliminate noise BUT you MUST use STP patch cords, patch panels, and jacks, the equipment must have fingers to use the Screen to complete grounding. and proper grounding using 6awg cable is required. Scrap off the paint to the metal before grounding. (Grounds SHALL be run to the main building ground rod) NEC code your electrician should know it.
With out the STP Patch cords ,jacks and patch panel all you did was run expensive UTP cable.
If you are worried about noise and can afford it use fiber it is highly upgradable just update the cards and switches to the speed you want. Get it pre terminated so you do not need a fiber kit.
Fiber is capable of long distances, Coper S/U TP is good to 300' that gives 28' to play with for your patch cords.
With fiber you can put it on a ballast and electric since its glass EMI generated pulses from a atomic/nuclear detonation will not affect it.
(That is why the government invested in the development of it and uses it in the Pentegon) Been there done it.
UTP is suitible for inside or outside use just make sure you get the right type.
Indoor or Outdoor and protectors for outdoor use.
You are using this in a House so the return air is ducted back so you do not need plenum grade cable which is non toxic if burnt in a fire.
Properly hang all cables ever 3-5' that will help resale value too in the future.
COAX had its day but I would only use it for device specific installs.
Coax Tv, Audio runs, Video runs, mostly 1 pair interconects.
In the future we will be using all 4 pairs of the cable for 1gig ethernet. So if you do that your 568B cable can update just by new adapter cards and switches. Coax you will need new "Media" Converters which is and additional expense.
Make sure you run a triplex or quad drop to each location for expansion and I would use 1" conduit for each drop. Add extra drop locations for future use in case you want to move funiture around.
You only want to fish it once and outside walls are a pain. the Extras will provide for phones to be placed in each room and a computer, network printer, XBOX, or TVs now have Internet connections.
Heck a 6plex might be better depending on what you will add.
Punch them all as 568B and label in blocks 1a-d/f 2a-d/f and so forth. Make a comitment that (a) is phone, (b) is pc, c-d/f is reserved for spare.
Do Not use a Home Depot command center either they are to small for data telephone is ok. Get a Rack and use or have a closet on an outside wall added for your data and telephone, and any other services. ie cable tv, sat, or what ever.
IT will get hot in there so have a window A/C unit installed to keep it cool in there.
dedicate breakers for that room and unit. You would be amazed how fast you can over load a circuit that shares other room electric runs.
I run 3 romex power cables to the electric panel and label it and let an elctrician make the connections. 120V and 240V for normal power and a UPS that I have (heavy duty).
I have a certified BICSI card and have been in the feild for 8 years installing and designing networks for major corporations.
www.BICSI.org if you would like to check out the hows that are being introducded in to the industry for the last several years since MA Bell was broken up.