13 replies
by dmiles
Step 1: Check Hardware
From Windows Start, select Settings, and then choose Control Panel. Double-click the System icon, and choose the Device Manager tab.
Step 2: Locating "Unknown Monitor" Entry
Click on the Monitors entry, select the monitor entry beneath it. Check to see if it says "Unknown Monitor". If it does, proceed to Step 3.
Step 3: Change Monitor Information
Follow the steps contained in our tutorial, Verifying Correct Monitor for Windows 95 or Verifying Correct Monitor for Windows 98.
Step 4: Shutdown and Restart
It seems as though you are descibing a monitor problem,when a video problem occurs you most likely will see a black screen or screen with a blinking cursor
To troubleshoot the video card,check the manufacturers web site for updated video drivers
by trish44
Poster rated this answer.
by chris910
It is the Monitor. (95% probability)
If I was the tech working on the monitor I would be looking for fractured/cold solder joints.
DO NOT OPEN THE MONITORS CASE UNLESS YOU KNOW WHAT YOU ARE DOING!
by trish44
Poster rated this answer.
by jedurham36
I suspect that your monitor is dying. Try these things first:
UNDER NO CONDITIONS open the monitor case and attempt repairs yourself !!!!!
1)Can you adjust the contrast/brightness?
2)Have you tried to degauss your monitor?
3)If it is just one color that is funny, one of the electron guns might be bad. If this is the case, throw the monitor out, it is not worth repairing.
4) If the pictuce is out of focus, throw the monitor out
5)Try the monitor on a diffenert computer. Try a known good monitor on your computer. If the known good monitor behaves correctly, you can rule out your video card. If your monitor misbehaves on the other computer, it is the monitor.
6)Your monitor driver may not be certified for use with Windows 2000 or XP. Try to use the built-in "generic" driver, or get the certified driver.
by trish44
Poster rated this answer.
by csmith
A quick test.
Lower the refresh rate on the monitor.
My Computer, ControlPanel, Display, Settings, Advanced, Adapter.
If things improve with the lower refresh rate, it is definitely the monitor.
Note* This will not find a bad degauss circuit or some other problems.
The next test, swap monitors.
It is very very likely that this problem is in the monitor.
Regards, Chris
by trish44
Poster rated this answer.
by bsj_molena
Here is a sure fire way to find out what is happening. Borrow a monitor from a friend that you KNOW works. Connect it to your computer. If the monitor looks fine, it is your monitor. If the picture is still faded out, it could be your video card.
It sounds like you have the incorrect drivers installed for your monitor, or maybe they are corrupt.
by trish44
Poster rated this answer.
by jimjennings
by trish44
Poster rated this answer.
by trish44
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending