Discussion Locked

video problem w/Abit MB's

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This is the second time, I've had to replace an Abit MB because the system I built fires up but doesn't produce any video upon booting. I have done the Barebone Boot, with no results. After triple checking my connections, I'm wondering "Is it me(?)" or is this a common problem with Abit MB's? I only purchase this manufacturer's boards at customers behest! Help!!! Please..... I promise not to recommend another one to anyone if I can get this one out of my shop.

2 replies

by thechas

I've had a number of "case" related issues relating to no video. But, come to think of it, many of these were A-Bit motherboards.

What I have found is that the AGP card does not fully seat in the AGP slot.
Since the AGP connector is interleaved, the connector need only be a few 0.001" from fully seated to cause a problem.

To test this, I remove the bracket from the card and and see if the card seats lower into the socket.
If the system now boots, a little bit of careful filing on the DB-15 holes in the bracket corrects the problem.

On some older boards, there was a problem with a bad lot of capacitors.

Still, I have found A-Bit to be one of the better boards that I have used. Second only to genuine Intel brand motherboards.

A-Bit and Asus are on my top list.
Followed by Shuttle, Epox and FIC.

Chas

This discussion is closed to new replies.