Discussion Locked

Video screws up on Nvidia Geforce2

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a PIII 450 mhz with 256mb ram running windows 98SE, directX 8.0 on a gigabyte GA6BXC motherboard. The video card is a Nvidia Geforce2 MX400 64 mb ram with tv out. After I play simcopter for a bit the video turns to about 2 colors or so. You can still see sortof what your doing but you have to go out to the game menu and come in again to restore the video. It also does this on Railroad Tycoon from Microprose. It does not mess up on Flight Simulator. I have tried a different monitorand the computer company replace the video card with a new one. Same thing. The screen will turn red or blue or some other color but you can still see shapes, etc.

7 replies

by dmiles

First check the monitor setting is correct (vga or svga)

Then go to display and adjust the refresh rate it may be set to high that it will not support display settings

Then click on settings tab,check the color pallette to see if changing to 256 color will make a difference n how the game is run.

by rob_jantz

I uninstalled webshots, I think that might have been the problem, restored performance defaults, and disabled some items in msconfig. thanks for your time.

by thechas

3 suggestions;

Check for a memory leak.

Set the AGP aperature in BIOS settings to 128MB

Install the latest AGP mini-port driver for your motherboard.
I would get the driver from the chipset mfg instead of gigabyte, as there is often a lag between the chipset and mb mfg releasing new drivers.

by rob_jantz

I uninstalled webshots, I think that might have been the problem, restored performance defaults, and disabled some items in msconfig. thanks for your time.

by dcline

It sounds like a driver issue or maybe a directX issue. Try this link to www.driverguide.com. I found the driver you need and I would send you the link, but you need to be a member to access the driver page. (free membership). You could also trydownloading and installing directX again. Your install may be corrupt, but I'll bet the driver will probably take care of your problem.

by rob_jantz

I uninstalled webshots, I think that might have been the problem, restored performance defaults, and disabled some items in msconfig. thanks for your time.

This discussion is closed to new replies.