Discussion Locked

Virtual Memory

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On my proxy server i am getting the error that my virtual memory is out of space and to change it. I went into the system applet in control pannel my Virtual memory is set to min 32 megs and max 82 megs, what can I do to make the virtual memory more, or to stop the errors from continueing. I also have maximize forground applications, set to high.

12 replies

by nicko

Make more virtual memory available by specifiying a higher minimum and maximum in the two boxes and click set. If you have more than one drive in the machine, move the paging file off the system drive. This is recommended to increase performance.
MS recommend virtual memory minimum in Mb = actual memory = 11Mb. Go for this for the minimum and set a max of 64Mb higher.

Monitor this over a week and see if you get any errors again. The virtual memory will start off at the minimum value and expand up to the maximum if it needs to.

by mndthegap1

i switched the minimum file size to 11mb and the maximum to 64mb. and set it. I got a warning saying that the crashdump will be disabled is that a problem or not to worry about it. I am still getting the error though saying i do not have enough memory for virtual memory, i have the c: drive with only 9mb left, how can i switch it to my d: drive and or what items or programs can be deleted from the system drive without disrupting anything, all i have on it is nt, proxy server, and IIs.

by mndthegap1

how do i move the paging file off the system drive and onto my other partitioned drive??? please help!!!!!

by pvp

Nicko had a typo! That should be min = RAM + 11 MB.

I like to have twice that amount, preferably split on two different physical devices. My 256 MB machine will come up with 267 MB initially. I have 267-267 set for both the C and D drives for a total of 534-534.

Setting both initial and max to the same value minimizes fragmentation in the paging file.

by grantcom

Sounds like you are reaching critical mass on this drive with only 9mb of free space left. You need to clean out all of the temp files you can. When you say "proxy server" are you speaking of a dedicated proxy in an NT domain or an Internet Connection Sharing proxy? If this is the system disk I would seriously consider installing a much larger drive and ghosting a copy to the new drive and install it as your system drive. I am surprised you haven't totally crashed. What is your OS?

by tuck46

I've got a bunch of old nec 5100's with 32meg of ram that get same errors. I set min and max to same using 2x ram plus registry size (set registry to 12)=76. Works fine for me.

by dc1

To move your pagefile go to the system applet in control panel. Choose performance, Virtual Mememory and change. Hightlight the other partition and enter your minimum and maximum pagefile sizes and choose Set. Next highlight the original pagefilesizes and clear the minimum and maximum values and click set. You will be warned about not being able to create a system dump, and you won't with this setting but it is how you move a pagefile to another partition.

This discussion is closed to new replies.