Question Locked

Vista Very Slow Transfers in Workgroup- Server 2003

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client that has a workgroup setup with a Windows Server 2003 Enterprise Ed., about 5 XP workstations, and 4 Vista Home Premium notebooks. The Vista notebooks connect via a Netgear Rangemax MIMO G router. The firmware is up to date. Each notebook has the latest MS Updates. The notebooks connection to the internet is fine. But their connection to the server and other workstations is ridiculously slow. I'm talking hours to transfer a few pictures from the server to the Vista notebook.
Any ideas on how to speed the file transfer speed?
Thanks,
Stevens

7 replies

by <--- due west

Hi theStevens,

Firstly Vista Home (in any flavour) is not designed to work on a Domain Server based network, but should work fine as a "Peer to Peer" network with your XP PC's.

XP Home would only allow a maximum of 5 simulateous connections... Vista has Meeting Space and that handles 10 concurrent connections...

Back to your immediate problem... Vista has "improved" tcp/ip by including automatic tweaking to adjust the packet size according to the network its on. Great in theory but I've seen soooo many network problems due to this.

Here's what to do - I'm assuming you have Administrator priviledges...

Check the state or current setting of TCP Auto-Tuning

1. Open elevated command prompt with administrator?s privileges. (Click Start, type CMD press Enter if you're already administrator level).
2. Type the following command in the DOS box and press Enter:

netsh interface tcp show global

The system will display the following text on screen, where you can check on the Auto-Tuning setting:

Querying active state?

TCP Global Parameters
???????????????-
Receive-Side Scaling State : enabled
Chimney Offload State : enabled
Receive Window Auto-Tuning Level : normal <----- this one!!!!
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled

If it's "normal", disable TCP Auto-Tuning

1. Stay in the same DOS box.
2. Type the following command and press Enter: (one line, no carriage returns)

netsh interface tcp set global autotuning=disabled

Test your networking again. If it doesn't fix it, you can reverse the procedure as follows:

Enable TCP Auto-Tuning

1. Open elevated command prompt with administrator?s privileges.
2. Type the following command and press Enter:

netsh interface tcp set global autotuning=normal

Xmas Cheers,

Due West

by atltek

Thanks for the reply. I'll try that 2morrow when I go on site. What do you think about SP1 for Vista? From what I've been reading, it seems like there should be some improvements.
check this out: http://blogs.zdnet.com/Bott/?p=336

Cheers!

by les

Keen ti hear if this improves the network performance. I have MYOB running on Vista Home Premium and the time to print an invoice is poor.

by trr.usa

I was stumped on this for dayzzzzzzzz. Autotuning diabled did the trick. Thanks!

by atltek

Sorry, but with the holidayz, my client has been just kinda dealing with the slow speeds. I will followup as soon as I get the go ahead to try it at their office.
-Stevens

by les

Tried the registry change suggested and made no difference.

This discussion is closed to new replies.