Question Locked

Vista VPN wont disconnect

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi there,

I'm using Vista's VPN client to connect to our ISA 2004 server across the net.

I can connect/disconnect fine, until I start using applications like Microsoft Office across the VPN. From this point, if I try to disconnect it hangs completely and seems to prevent the computer from going to sleep, often resulting in a BlueScreen stop.

Any ideas?

Cheers,
Brendan

4 replies

by rob miners

My Computer, Properties, Advanced, Startup and Recovery and untick Automatically restart. While you are there make sure that Small memory dump (64 KB) is selected and the output is %SystemRoot%\Minidump. The Blue Screen will dump the Minidump file.

Restart the PC normally as this will allow the PC to Blue Screen. Take note of Stop 0X000000 error message and Google it.

Or if you are feeling adventurous

Minidump Files can be found here. C:\WINDOWS\Minidump\Mini122707-02.dmp

How to read the small memory dump files that Windows creates for debugging
http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:
http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and brows to the Symbol folder that you have downloaded and installed Symbols to, select OK.
Close the workpage and save the Workspace information. This should lock in the Symbol path.
Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.
There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.

When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.
Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.
FAULTING_THREAD: 864f6a98

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT:
f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585

STACK_COMMAND: .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP:
sgiul50!DrvBitBlt+585
bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

You couls also try this.

I would download filemon from SysInternals. Then logon as a normal user, right click and select runas then use the Administrator Account to start filemon.

Then stop filemon from logging just after your freeze. Then look in the Filemon Log for any discrepancies.

Filemon:

http://www.sysinternals.com/Utilities/Filemon.html

by brendan-news

Thanks Jacky,

I hadn't thought of using filemon. Will give it a crack. And I've changed the Startup and Recovery options.

Cheers,
Brendan

This discussion is closed to new replies.