Question Locked

VLAN configuration - dont hav internet connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Im fresh IT student to configure a VLAN. Im use the 3com 4500 switch that is L3 switch. I have set 3 VLAN in this switch. The VLAN1(default VLAN) IP interface is 128.0.1.254 and subnet is 255.255.0.0, V2 128.0.9.100 and 255.255.255.0, V3 128.0.3.254 and 255.255.255.0. The router IP is 128.0.10.10.

The PC in VLAN1, 128.0.xxx.xxx, gateway 128.0.10.10 have internet connection. The other VLAN2 and 3 dont have internet connection even PC gateway is 128.0.10.10. or own VLAN IP interface. Why VLAN2 dont have internet connection? Subnet? ACL? IP routing?

Im noob and no idea for what going on, can anyone guide and any related link for reference? Thx

5 replies

by beanxyz

I didn't caculate ur subnet , but I want to know if u configure the sub interface in your router and their related firewall settings.

Cheers

by cg it

if 3Com does their configs like cisco, then you need a trunk port. In Cisco, by default, trunk ports allow all vlans to use it.

by cny2009

Sorry i dont understand. The 3com 4500 is connected to the router, are you means set the trunk between them? Is the Layer 3 switch able to route packets from VLAN2 and VLAN3 to default VLAN1 to get to the router gateway, 128.0.10.10?

by cg it

if 3Com does what Cisco does, than the vlans should all be able to access the trunk line.

note: after that, the router has to route the packets to the default gateway so... have to setup your route tables to do that for multiple vlan subnets. Hopefully the router you have can do that [or layer 3 switch].

Intervlan routing is simply having the route route packets between vlans, not to the default gateway.

This discussion is closed to new replies.