Discussion Locked

VLAN Help

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i am having trouble with my VLAN. We have just set up a Cisco 6000 and we have a T-3 pipe. Our internet is really slow. download speeds are less than 56k. Our file transfer is really slow as well. I am not sure what to do. we have only been live for about 3 weeks and nothing is working they way it should be. I am asumming that is should really be fast and I am not going crazy. We had a cisco tech in and he said that everything looks ok. His response was how fast did you expect it to be. He hasn't been back since. We have all fiber back bone and our server all have gigabit cards in them. We spent alot of money on equipment. Any information or direction would be greatly appreciated. Thanks in advance. Hope someone would

14 replies

by road-dog

Are all VLANs slow or just one? Is the LAN side fast WAN slow? Check CPU utilization on the router or blade router.

Downloads from where? Congestion could be at source. Are other Internet apps speedy?

Where are you located? Was the Cisco tech Cisco or VAR / Consultant. He should be answering these questions.

bob.ackler@kebocon.com

by road-dog

OK, try the 30 gig file transfer between the two VLANs that are local. Ig this goes well, then that validates the switch and router. At that point, you need to look at the DS3. I suggest you request some performance testing from the provider. They will talk fees, but this is background noise against the cost of the "fat pipe" you've got. If you have visibility, pull all available stats on the DS3 interface, look for sync loss and other problems....

by andru1313

We have 3 VLans. Both are slow. the WAN seem to be slower. but It took about 3 days to copy a 30 gig folder. kept bombing out as well. the downloads from most internet sights. APPS are running very slow as well. We are located outside of Philadelphia plymouth meeting area. Cisco.

by meganetcomputers

How many PC's are on each VLAN? What do you have at the access level where the clients are connected? Do you have any switches or hubs (Other then the router or is it a catalyst switch) in place? Please contact me by e-mail and I can assist you further if you wish. Thanks.

by some guy in seattle

There could be any number of reasons why things are the way they are, so it sounds like some basic troubleshooting is in order. Grab a laptop or "easily-portable" desktop :-) and plug in at various segments of the network (starting at the router moving inwards) and test your throughput speed. Since you have a T-3 it should be easy enough to tell the difference between T-3 throughput and 56K. With this you should be able to figure out the device that's causing the bottleneck. From there it'sa matter of analyzing the device or its configuration to find out what issues may be occurring there. If you run into a bottleneck right away, then it's either your internet router or T-3 pipe.

Hope that helps-

by ckilday

Andru: How do you have the VLANs addressed? What is your subnet mask like for each VLAN? Do you have a default gateway specified for each VLAN? Did you purchase an RSM blade (router switch module) for this unit? It sounds like your packets don't know where to go or how to get from one VLAN to another. When that happens, the switch is (I believe) default programmed to broadcast the packet out every port except the one it received it from. This could explain why response time is so poor. I'd be happy to look over your switch/router configuration for you. You can send an e-mail to chris.kilday@ctg.com. Be sure to include the "show hardware" or "show version" output along with the "show configuration". Include the "show vlans" from the switch too, please.

by margrave

Make sure you have the right cables and they are not damaged. Synchronous Serial EIA/TIA-232 signal speeds up to 64k. Faster speeds you need EIA/TIA-449 or V.35. Also, check your clock rate on the T3 interface. This may be the cause of slow internet, file downloads.
Also, make sure you paid for a full T3. We thought we did until we checked with our Telco and found out it was only a partial. (clerical error)
Also, check for any electrical/voltage problems in and about your equipment and linesthis will affect performance also.

by margrave

when I said check your clock rate I meant call the Telco and check what they set it at. Your end is the DTE, the telco is the DCE. They set the clock rate.

This discussion is closed to new replies.