Discussion Locked

VPN?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here is the scenario. There is an office in CT and an office in CA. The office in CA nees to be able to acces an accounting program on the server of the CT location. Is a VPN a good choice here?

Thanks!
Stan G.

7 replies

by lordinfidel

This is the perfect example for a vpn.

Unless of course your company does not care about security.

This can though also be done thru firewall rules by limiting access via IP adresses to the server that contains the data.

by smg9500

Wonderful. That is what I was hoping for. IF I were to implement a VPN I would use a firewal so that they would have security. I had another colleague suggest using PC Anywhere. Do you have comments on that?

Stan

by larrylim

Pc Anywhere is not really that good. I have offices worldwide and we are using VPN to connect all the networks before we moved to frame relay. VPN is much cheaper as compared to frame relay. And the reason why we used frame is due to performance issue. I would not use PC Anywhere due to the lack of security. I am currently using PC-Duo which has 3 levels of security to set.

by csocci

What kind of speed are you looking at for your connection? It is probaly nowhere near the 10 or 100Mbps speed of the LAN in the host office. As such, your application may not run at all.

PC anywhere - maybe. Why not set up a Win2K Server with Terminal services activated? You can get one or two users out of the box, or purchase CAL's as needed. You can install this on a fast desktop with a few hundered MB RAM and get GREAT results over a modest Internet connection.

Its also encrypted.

by smg9500

Another problem is that they have a cable modem connection. Upload speeds are limited to 256kbps. So it is not too fast. So the VPN would only run at 256kbps right? What did you mean when you said?

"You can get one or two users out of the box, or purchase CAL's as needed. "

Right now they have two offices that are right across the street from each other. They are using an antenna to connect the two offices. One office uses the accounting that is on the other offices server. Sometimesit takes 4 minutes to load up the program! The antenna is suppose to be transmitting at 1.6 mbps. So the 256Kbps over the VPN will not improve the situation.

Thanks,
Stan

by montytan

Depending on how much you want to spend on the project, I put in a laser option for an office park where I had two offices. Digging up the parking lot that separated the two ofices was not an option for me, and leased lines was too costly. So I put in a laser link - T1 speeds. No licensing and other licenses were required. Total cost of the project was 15K. That was it. All I needed was line of site to the other office. It even works good in fog. The link operates over 1/5 mile so it isvery close.

Seems like you are using MS implementation. Just a second thought to your set up. Use IPSEC for the encryption (comes with Server and Adv Server) and use a cable modem/SDSL implementation to get decent performance speeds. Dependingon the number of users, this is usually enough for a SOHO office.

M.

by johnkr

I have just implemented a VPN connection between a remote offices and our main office using the Nortel Instant Internet 100. This creates a secure IPSec tunnel between the 2 locations. This is a relativly cheap and secure solution if you already have internet access in at least your main site. We are using a DSL connection at the remote site and the speeds are very good. For more security, we also have use Firewall-1 at the main office. You can see some examples and also see how to configure the Instant Internet by going to www.vpnpage.com.

This discussion is closed to new replies.