Discussion Locked

VPN

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to create a VPN between Spain, Argentina, Mexico, Portugal (branches) and our old and the new customers. What is the best way or what company can resolve this global solution?.

9 replies

by ruturaj

THere are a lot of factors to take into consideration.
1.) The type of applications to be used.
2.) The bandwidth available at these locations.
3.) The security required.

You can use standard PPTP (Worldwide Norm Standard)on NT boxes (or Win2k)at at a central location (I assume it's in the States).
If you are looking at heavy data movement or Client / Server Apps that require major bandwith you are better off going with Terminal Services (Requires about 28K bandwith due to the fact that processing is centralized).

by wlbowers

My suggestion is to utilize VPN throuth the internet. Th is the most cost effective route. The only other option I could see would be sat. Reguardless of the transport medium use the same router and security (firewall) manufacture in all locations. You can create a constant connection or a connection on demand this way. It is going to require a decent internet connection depending on the traffic so be sure to plan towards that.

The first company to check with would be CISCO. They are heavy into wan solutions. IBM and Nortel also would be worth a shot.

Good Luck

Lee

by mturner

I have a solution that I have currently implemented between Milan, Italy and Brighton MI USA. But in order to do this, I need to know a few things. Do any or all of these sites have internet access greater than Dial-Up. By this I mean how do these branches connect to the internet. In my solution, both sides had T1 (and an E1 in Italy) and I created an IPsec VPN Tunnel between both locations private networks. I did this using two Cisco 2610 routers running the IP PLUS IPSEC feature pack. As longas you have cisco equipment in place, I could develop a solution for you. If you would like to discuss this further in detail, contact me at my email address
mturner@lewisig.com

Hope this helps,
Mike

by kent.manley

MCI Worldcom is an international company that can provide you with not only the network backbone, but outsource the equipment acquisition and management, and may actually be cost effective if you are talking about site-to-site connectivity rather than dial up (user-to-lan) connectivity. That makes it sort of pricey, especially internationally.

Contact me on my email for a Point of Contact if you wish to pursue this further.

Disclaimer: I do not have or do business with MCI Worldcom, I just happen to be aware of a capability they have that seems to fit your requirements.

Kent
kent.manley at att.net

This discussion is closed to new replies.