Discussion Locked

VPN Connection

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are able to connect to our Wn 2k Server from a remote VPN client using DHCP. We cannot see any of the other clients from the remote. Are we missing a VPN tweak? Our Server is T3 to the internet and the client is a standard 56k modem.

3 replies

by stillatit

By "cannot see" do you mean you cannot ping the other stations or cannot see them in network places (network neighborhood)? If you cannot ping, check he IP address the server is giving the client, and make sure that the server is routing that address to your LAN (and that the router on your LAN has a route back to the server). If it is a neighborhood problem, make sure you have netbeui turned on and used with the vpn. You may also need an LMHOSTS file, depending on your configuration.

Good luck.

by avskier

We didn't need LMHOSTS on Win2k server and Netbeui was turned on. Looks like we may have forgot NAT. There were a couple of things I tried at once so it was hard to pinpoint the exact fix, although it was definitly an address problem of some kind.Thank you very much for your response.

This discussion is closed to new replies.