Question Locked

VPN problems with Windows XP / Windows 2003?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

*quick note all these computer are behind a Linksys Router. I'm trying to get this VPN thing down and started with the basics.....

I recently set up to allow incoming connections on my home computer Windows XP Pro. So I could dial in to the VPN. At first it didn't work so I found out that you had to map ports 1723, 500 and 50, 51. Once I did that I could connect from anywhere to my home machine with no problems.

I recently set up Remote access to allow remote clients to come in on a Windows 2003 server. Started the service every thing ran great. I mapped the same ports 1723, 500, 50 and 51 and try to connect to the VPN from a remote machine no matter what it will not connect. It sits at "Verifying user name and password" and errors out on Error 628. So I gave up and tried to set it up on a friends windows XP machine allow incoming connections and map the ports just as my workstation at home. He uses the same router but I get the same error (as me trying to sign on the 2003 server)?! Any ideas why this is?? why mine works and the 2003 machine or my friends XP machine doesn't work at all?!

Any help will be gladly appreciated. Thanks for your time!

4 replies

by rkuhn040172

There is a check box for allow either PPTP connections and another for IPSec connections. Not sure about LinkSys but you may check for that.

by jmcaloney

I have the advantage of managing a Server 2003 that is exposed to the internet - no NAT, no firewall. I also manage several behind Linksys, Netopia, and Zywall NAT boxes. The direct connect just works - RDP, PPTP, L2TP. All of those behind the NAT boxes will let me rdp and pptp (even though it is protocol 47, not port 47), but not l2tp (if port 47 works for protocol 47, then why not port 50 for protocol 50?). My guess is that consumer router technology is not perfect...

by error628

Hello,
i also faced this problem error 628 code error again and again.. the solution explained here is also very helpful.. i fixed this problem by visiting this error628.com someone might get help from this site also..

This discussion is closed to new replies.