Discussion Locked

vpn solution behind a cisco ADSL router.

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I'm trying to set up a vpn connection to a vpn server who is behind a CISCo 827 dsl router.

Who can help me ?

9 replies

by stillatit

The server needs a valid IP address. If you are running NAT, you will probably not be able to do it. If you have a valid IP address from your vendor, assign one to yoru server and allow outside connections to it in the router.

Good luck.

by justemazing

More info please: Is the vpn server operational for others and you are trying to make your connection to it? What are you using to connect (OS, connectivity, ip info, etc)?

If you are setting up the whole vpn with NAT to the server, make sure youhave mapped the VPN ports to the server in the router config.

by mckaytech

I can't give a complete answer without knowing which feature set you have on your router and how your ADSL is set up by your ISP (PPPoE versus PPPoA, is the router the PPPoE client or is your workstation the PPPoE client, static IP versus dynamic, etc.).

Generally, though, you have two options. The first is to make a VPN connection to the router itself and then connect to the server behind it just as though it were a LAN connection.

The second would be to use port or network address translation to associate your external IP address and some port number with the internal IP address of the VPN server and the port number to which it responds.

If you go to Cisco's Web site and search on '827', you can find sample configurations that address many common scenarios and you may be able to find one there that fits your situation.

paul

by weoy

Hi there,

Yes, firstly do you have a static IP for
your DSL line? If no, get a block of static
IPs from your ISP. One for your router.

You could use one for the VPN Server who is
sitting behind your DSL router. Are you running a FW anywhere?

Hope it helps.
Thanks.
Nala

This discussion is closed to new replies.