Discussion Locked

W98 BLANK SCREEN AFTER 20 MIN IDLE

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I JUST INSTALLED WINDOWS 98. AFTER 20 MINUTES OF BEING IDLE, I GET A BLANK SCREEN WITH A BLINKING CURSOR. I CAN'T CONTROL-ALT-DELETE OUT OF IT. I'VE TRIED CHANGING EVERY SETTING, BUT NOTHING WORKS, EXCEPT REBOOTING.

3 replies

by dandee1

This sounds like a common power management problem. Power management is controlled by 2 things. Power management located in the Control Panel and Power management located in the CMOS. The 1st thing to try is turn off Windows power management in the Control Panel. If the system goes to "sleep" the CMOS power management has sleep mode enabled and the things that turn the system back on are turned off. Therefore you will have to go into the CMOS (Press DEL to Enter Setup) on startup and adjust Power Management accordingly. Either you will have to turn Power Management Off or find the settings that Enable the keyboard and mouse monitoring.

Hope this helps. If you need more info e-mail me.

dandee1

P.S. HAVE A DANDEE DAY!!

This discussion is closed to new replies.