what are "cpqdrv" and "cpqs" files
Could any one tell me what "cpqdrv" and "cpqs" files are? I need to make more room on my hard drive. Would I be ok removing these files?
Thanks
Windows Forum
Could any one tell me what "cpqdrv" and "cpqs" files are? I need to make more room on my hard drive. Would I be ok removing these files?
Thanks
by jm
by hal 9000
Well I to would leave them be particularly if only a few hundred K could be recovered.
Have you tried Compressing the Drive by opening My Computer then right clicking on the drive in question and selecting properties at the bottom of that box you have the option to Compress Disk just add a tick to that Check Box and hit apply. Depending on the size of the HDD in question you can then turn off the monitor and walk away until it finishes or if it is a NB alter the power settings so that the unit finishes running the application but without the monitor needing to be on. If you already have done this your only alternative is a Bigger HDD.
Col
Have you done all the basic housekeeping tasks to create more room on your hard drive.
ie
Have you emptied the recycle bin?
Have you removed any unecessary programs? etc
have a look at this link
by route81
cpqdrv
This directory contains all drivers for your Compaq. Definately DON'T delete these! (Unless you have updated drivers for everything.)
cpqs(HW)
The cpqs driver controls the obsolete Compaq CPQS tape adapter and tape compression.
by dmiles
Is your computer a Compact, as this is what I have found.
Generally accepted ideas/rules for compaq computers.
1. Do not delete anything in the System_Sav D: drive. It contains drivers and your Operating system install.
2. Blue swirly compaq Recovery CD does not have full OS on it. It references the System_Sav D:\ drive mentioned above. (The one not to delete)
4. Compaq Drivers are called SoftPaqs.
5. If you have a compaq driver problem and have a System_Sav D:\ Drive you can restore the drivers right from your hard drive.
-First go to the D:\ Drive and go to the cpqdrv folder and then go to the icons folder.
-The icons folder will have folders labeled with numbers. The numbers are softpaq driver numbers. If you double click one of the icon with a number a picture will pop up. That picture tells you what driver that number will restore. When you find the correct picture of the driver you need to restore then write down that number, we will call it "num1".
-Now go back to the cpqdrv folder and open the "num1" folder. In that folder will be a 3 digit alpha-numeric name, we will call it "num2", write it down.
-Now go to Start - Run and type this: c:/cpqs/quicksr/qria num1-num2
-That will restore the driver right from your system_sav D:\ Drive
This discussion is closed to new replies.
Sort by Trending